Page 3 of 4

Re: Problems with viewing HD-Channels (7.23.08)

Posted: Sat May 19, 2018 2:29 pm
by Ernst1952
Thank, it will be a while to do all these things.
I´ll write when i´m finished,

Re: Problems with viewing HD-Channels (7.23.08)

Posted: Sat May 19, 2018 3:19 pm
by Ernst1952
First result with the first link you sent me.

Setting: Demux = prog
Codev H.264/avc = LAV Video decoder
Video Renderer = EVR Custum Presenter

See attached snapshot.

Re: Problems with viewing HD-Channels (7.23.08)

Posted: Sat May 19, 2018 4:09 pm
by Ernst1952
And now the result of the second link in your post.

I tried all h.264 codecs but see the result.

Sorry, file to big, so i cant show ypu, but it´s a normal .png snapshot by progdvb (F12).

Re: Problems with viewing HD-Channels (7.23.08)

Posted: Sat May 19, 2018 5:09 pm
by Ernst1952
As i wrote i have a dual boot system running w7 ultimate x86 or w10 prof x64.

All the time progdvb works better within w7 but since the new hardware it works perfect wihtin w10.

Dont know what is it ? Yesterday i put my old fx380 in the new system, results see before. :-(

Re: Problems with viewing HD-Channels (7.23.08)

Posted: Sat May 19, 2018 6:41 pm
by Prog
Please send me logs. Are you sure about h264 type of channel?
Also you can try EVR renderer for better compatible with video drivers.

Re: Problems with viewing HD-Channels (7.23.08)

Posted: Sat May 19, 2018 7:17 pm
by Ernst1952
I´ll do, but where and when sholud i start logging ?

Thx

Re: Problems with viewing HD-Channels (7.23.08)

Posted: Sat May 19, 2018 7:20 pm
by Prog
Options->Debug->Logs

Re: Problems with viewing HD-Channels (7.23.08)

Posted: Sat May 19, 2018 7:33 pm
by Ernst1952
Sorry i found it before your reply.

Re: Problems with viewing HD-Channels (7.23.08)

Posted: Sat May 19, 2018 7:51 pm
by Ernst1952
The logs while viewing a normal SD Programm (some stripes and some sound disturbtions)

HD-Channel came soon.

I zipped the whole log-folger beccause .log extension is unknown.

Re: Problems with viewing HD-Channels (7.23.08)

Posted: Sat May 19, 2018 8:09 pm
by Ernst1952
And now the same whiile viewing HD-Channel.

Re: Problems with viewing HD-Channels (7.23.08)

Posted: Sun May 20, 2018 12:52 pm
by Ernst1952
Prog wrote:
Sat May 19, 2018 6:41 pm
Please send me logs. Are you sure about h264 type of channel?
Also you can try EVR renderer for better compatible with video drivers.
Some posts before you wrote it. i.e. Das Erste HD or ZDF HD or arte HD

Re: Problems with viewing HD-Channels (7.23.08)

Posted: Sun May 20, 2018 1:24 pm
by Prog
In log "TELE 5" channel is mpeg2 (not h264) and codec for mpeg2 not good. After that ProgDVB take random codec from system.

Re: Problems with viewing HD-Channels (7.23.08)

Posted: Sun May 20, 2018 2:03 pm
by Ernst1952
tele5 is not a HD-channel. Only the few i mentioned before and 3 to 4 other.

Re: Problems with viewing HD-Channels (7.23.08)

Posted: Sun May 20, 2018 11:09 pm
by Ernst1952
Hello Prog,

i´m at the end of my experience. I´m using progdvb longer than 7 years and had not prolems at all.
Now i changed my pc from old HP XW4600 to a newer HP Z210.
All is working as before, bur only progdvb.
I´m realy frustrated because my experience with MS and UNIX is since my diploma in computer sience 1982 very good.
i know MS since MS-DOS 2.0 until W10 pro.
what can i do ?
I run a diagnostic disk from HP telling me all test pased.
i runf sfc /scannow nor error found.
It is the end of that what can i do.
Can you help ?
Regards

Re: Problems with viewing HD-Channels (7.23.08)

Posted: Mon May 21, 2018 6:37 am
by Prog
No. this is not disk problem. this is video codec or conflict video codec. May be hardware acceleration of h264 give this effect. Try disabled in LAV settings