Hi
I have a SS2 PCI card and DVB-T card with DBA driver.
ProgDVB (4.7x and 4.8x) worked fine till i changed ss2 driver, from 4.3.0 to 4.4.0 version.
Progdvb can't start SS2 device or can't get a proper data stream from ss2 card.
I just updated the driver file (skynet.sys), cause can't install the whole technisat software. It requires Service pack 2 and i have winxp SP1
(and can't install SP2, but that is other matter)
Is there any other file required by progdvb that i should update ?
Thanks.
#2
What are the requirements for that new driver version?
You may be out of luck, if this also needs SP2.
However, do things work if you put back in the old driver file?
You may be out of luck, if this also needs SP2.
However, do things work if you put back in the old driver file?
My signature:
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
#3
The fact is that new driver version works fine with other DVB programs.
It must be progdvb that 'needs' something else (i've read about some DLL but definitely don't know how progdvb works)
I've put back 4.3.0 driver, and 4.3.0 patched driver.
Its the same, progdvb can't start de ss2 device, since i have uninstalled old technisat software.
It must be progdvb that 'needs' something else (i've read about some DLL but definitely don't know how progdvb works)
I've put back 4.3.0 driver, and 4.3.0 patched driver.
Its the same, progdvb can't start de ss2 device, since i have uninstalled old technisat software.