#107
I miss an option do add custom ECMs in the CA module. Please take a look at DVBDream, you click the + or - there to add or remove providers. Something like this would be highly usefull.

also a there seem to be problems with the cnxcam module - some enhancements here would be highly appreatiated by TNK viewers :)

best regards and thnx for the best dvb soft ever!

#108
Its not Feature but improvement to scan can u make it faster?( like altdvb cause its takes too many time in scanning sat like turksat otherwise in alt.)
THANKS

#109
I would like to see the tv stream as desktop background like DreamScene from WindowsVista.
If you could make this possible it would be very nice =)

Greetings Mazo

#110
"I would like to see the tv stream as desktop background like DreamScene from WindowsVista.
If you could make this possible it would be very nice =)
"
Why ? 5 minuts toys?

"Its not Feature but improvement to scan can u make it faster?( like altdvb cause its takes too many time in scanning sat like turksat otherwise in alt.) "

What DVB card?

#112
Increase scanner timings.
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!



I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!


1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

#114
Depends on the version of ProgDVB.

On older versions you would add this to the ProgDVB.ini at the end:

Code: Select all

[Scaner]
AfterChangeTransponderDelay=3000
On more modern versions you may perhaps find some general option for this.
But I can't tell precisely, as I'm bound to W9x for some days right now.
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!



I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!


1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

#115
What's the chances of being able to receive DVB/IP streams? I can receive them with TSReader, but the only way you csn view them is to dump the IP data to a file and then view it with VLC.

#116
Juergen wrote:Depends on the version of ProgDVB.

On older versions you would add this to the ProgDVB.ini at the end:

Code: Select all

[Scaner]
AfterChangeTransponderDelay=3000
On more modern versions you may perhaps find some general option for this.
But I can't tell precisely, as I'm bound to W9x for some days right now.
thanks 4 ur add
there is no problem in older version (4.85.3) there is no ignored transponders but the problem in newer version (4.92.2)i tried to add

Code: Select all

[Scaner]
AfterChangeTransponderDelay=3000 
but with the same problem also i tried to increase it to 6000 also the same problem .

i will wait u tell u change ur os to find this option in modern version (i tried to search but found nothing )
THANKS & WATING


EDIT:

i want to say something to PROG (the person)
first many thanks 4 ur great work & program
also that problem approx in all new versions please try to fix it

THANKS

EPG

#117
Please make EPG display lithuanian simbols: ąčęėįšųūž. Thank you in advance :)
Technisat Cablestar HD2, ASUS A8N-E NForce4-Ultra, Athlon 4600+ X2, Geil 1GBx2 DDR400, Club 3D Geforce 8000GTS

#119
P> Request for the following resize/move picture functions.

P> Also, together with "resize/move picture functions" using keyboard
P> shortcuts is better:
P> 1. move whole picture upward.
P> 2. move whole picture downward.
P> 3. move whole picutre leftward.
P> 4. move whole picture rightward.
P> 5. stretch whole picture horizontally.
P> 6. stretch whole picture vertically.
P> 7. zoom in/zoom out (already realized).
P> 8. one shortcut key to restore the original size.

P> Also, add some preset options for various zoom settings is better.
P> These options should be user-defineable, I would like to set to 133% zoom, 109% zoom and 103% zoom.
Windows 7, 64-bit.
Twinhan AD-SP400(1041) DVB-S2.
KNC1 DVB-S2.
Technotrend S2300 Premium DVB-S.
Technotrend C1500 DVB-C.
Technotrend DVB-T TV-stick.
ATI 4550.
Asus Xonar HDAV1.3 Deluxe.
Creative S750 speaker system.
Latest ver.6 of ProgDVB Pro.

4-in-1 switch issues

#120
Waiting for your enhanced ProgDVB version with new switching method.
Hope it will resolve the annoying 4-in-1 switch issue lots of people are
experiencing now.
Windows 7, 64-bit.
Twinhan AD-SP400(1041) DVB-S2.
KNC1 DVB-S2.
Technotrend S2300 Premium DVB-S.
Technotrend C1500 DVB-C.
Technotrend DVB-T TV-stick.
ATI 4550.
Asus Xonar HDAV1.3 Deluxe.
Creative S750 speaker system.
Latest ver.6 of ProgDVB Pro.