problem with modulation in progdvb 5.16.1
some freq.
in nilesat get signal but not get any channel iam change modulation from
QPSK to NBC_QPSK
the progdvb get the channel but not work
and when go properties of the channel and change to QPSK the channel work good
i need help to solve the problem in progdvb 5.16.1 standard
the freq. in nilesat
10775 H 27500 3/4 work with modulation NBC_QPSK but true QPSK
11842 H 27500 3/4 work with modulation NBC_QPSK but true QPSK

Do you use scan transponder dialog?
What DVB card?

Do you use scan transponder dialog? yes
What DVB card? Kworld DVBS 100

BDA? What mode in "device options" ?

I am not have lot of information about kworld

Prog wrote:BDA? What mode in "device options" ?

I am not have lot of information about kworld

ok show that and download
ProgDVB.ini
DiseqTree.ini
to show the device option
http://rapidshare.com/files/152458400/ProgDVB.rar.html
thank you i need help

Try use BDA.device

Prog wrote:Try use BDA.device

with BDA.device
not work good with diseqc.
when search in hotbird port B
get some channel from nilesat not in hotbird
and with kworld.device with diseqc 4 port not work good
only with kowrld.device diseqc 16 port work good
the channel in nilesat
http://www.flysat.com/nilesat.php
and hotbird
http://www.flysat.com/hotbird.php
the signal nilesat recived 50 db work good with dish 50 cm in egypt
and hotbird work with dish 100cm or 120 cm in egypt

iam used diseq 4 port
A=NILESAT
B=HOTBIRD
C=ARABSAT OR (BADR)
dish 120 cm
diseqc type truman

I am not have sources of kworld.device. It is very old and can not support s2 modulation.

Prog wrote:I am not have sources of kworld.device. It is very old and can not support s2 modulation.

the problem
progdvb 5.16.1 standard
detection some Transponders as dvbs-2 but is dvbs-1
detect dvbs-1 as dvbs-2 ???????????
in nilesat

I also have several TPs that can't search out any channels, but there are signal indications....