Hi!
I own the Hauppauge HVR-3000 with a DVB-T and a DVB-S Tuner. I use the Sattilite for free-TV and the antenna for the local stations (ORF, ATV).
I have both types of Programms in my Favourites-List, but i can only watch one type. When i try to activate both "Cards" this happens:
Its very annoying that i always have to turn the one on and the other off..
Someone has a solution for me?
#2
The way, the original application changes the tuners on-the-fly, is not known in public.
Both tuners share some following-up hardware components, that are included in the device initiation routines. So they can't be addressed independently.
Perhaps the best way to go is, to set up ProgDVB twice, one time per tuner, and use just one version at a time.
Both tuners share some following-up hardware components, that are included in the device initiation routines. So they can't be addressed independently.
Perhaps the best way to go is, to set up ProgDVB twice, one time per tuner, and use just one version at a time.
My signature:
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
same prob. with Hauppauge HVR 4000
#3Hi,
same prob. here with HVR 4000.
Maybe there are enough users with "hybrid" tuners to support the development of a dual driver
Hauppauge WinTV7 manages to change channels between DVB-S and -T on the fly. But ProgDVB is superior in so many ways so please think about it.
Best Regards
Paul
same prob. here with HVR 4000.
Maybe there are enough users with "hybrid" tuners to support the development of a dual driver
Hauppauge WinTV7 manages to change channels between DVB-S and -T on the fly. But ProgDVB is superior in so many ways so please think about it.
Best Regards
Paul