Display posts from previous
Sort by

#2 by nuschii
Similar problem here. Got a simple DiSEqC 2.0 Switch to choose between 19.2 E and 28.2 E. Hardware is working fine, since both satellites can be scanned and tuned using the dvbutils on Linux.

However, no success using ProgDVB. It doesn't matter which setting I use (Simple, DiSEqC 1.0, DiSEqC 1.1) and it doesn't matter which port I choose for Eurobird 1 (28.2 E). When I scan for programs all I get are 19.2 E transponders.

Any suggestions?

Hardware: Technisat Skystar 2 TV PCI with BDA driver 4.5.0
Software: Windows Vista SP2, ProgDVB 6.20.04

.

#3 by Prog
2man2007: What DVB card?

2nuschii: Check settings->Device options. Must selected technisat. positioner not supported by this driver. But switch must work.

#4 by nuschii
@Prog: Additional API is set to Technisat. Also tried "Auto [Technisat]". No effect. :?

Btw: Here is my DiseqcTree.ini

Code: Select all

[Main]
TunerCount=1
Mode=255
[Tuner]
ID=4
[Tuner_0]
ID=5
CableTransponderList=
Caption={BDA} TechniSat BDA Digital Tuner
DevID=8C18D8A0026264610064657669ED
[Tuner_0_0]
ID=2
ListName=192;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=1
[Tuner_0_0_0]
ID=1
ListName=192;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_0_0_1]
ID=1
ListName=282;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
There are two times LNB Settings for 19.2 E. Is this normal?

#5 by man2007
my dvb card kworld
the best version work with diseq
ProgDVB6.06.5Std
the new
ProgDVB6.20.4Std
not work good and not get correct channel in sat
when scan 26 e get some channel from 7w etc

#6 by man2007
this in ProgDVB6.06.5Std work good
[Main]
TunerCount=2
Mode=2
[Tuner]
ID=4
[Tuner_0]
ID=5
CableTransponderList=
Caption=KWorld DVB
DevID=00000000026B776F726C640064F9
[Tuner_0_0]
ID=2
Type=4
[Tuner_0_0_0]
ID=1
ListName=3530;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_0_0_1]
ID=1
ListName=130;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_0_0_2]
ID=1
ListName=255;0;260;1
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_1]
ID=5
CableTransponderList=
Caption=Internet TV
DevID=0000000009697476006465766904

#9 by man2007
sos13 wrote:work OK for me .

kworld dvb-s 100
Image
thank you
but me used
KWorld.device
not used BDA.device
but with all in new version with progdvb not work good with diseq
1 sat get ok good
other ex.
when scan in 26E sat get channel from 7W sat not in 26E ? big problem !

Re: .

#13 by man2007
Prog wrote:Try change Settings->Device options. Must selected kworld.
thank you fixed the problem
select BDA then
device option ( kworld ) fixed the problem with diseq
**********but 2 problem
1 problem with all kworld.device or BDA.device
( some time when change from the channel to other channel in hotbird diseq ( B) loss the signal
fixed with
setting>>>other>>>>select ( Refresh channel onlost signal )
==========
the problem 2
with kworld.device the signal
level = 100%
Quality= 100 %
with BDA.device the signal not good
level = 36 %
Quality = 100 %
------------------------------
DiseqTree

Code: Select all

[Main]
TunerCount=2
Mode=2
[Tuner]
ID=4
[Tuner_0]
ID=5
CableTransponderList=
Caption=Internet TV
DevID=0000000009697476006465766904
[Tuner_0_0]
ID=2
Type=4
[Tuner_0_0_0]
ID=1
ListName=3530;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_0_0_1]
ID=1
ListName=130;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_0_0_2]
ID=1
ListName=255;0;260;1
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_1]
ID=5
CableTransponderList=
Caption={BDA} DigiGo DVBS BDA Tuner/Demod
DevID=A35715FC026264610064657669DC
[Tuner_1_0]
ID=2
Type=2
[Tuner_1_0_0]
ID=1
ListName=3530;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_1_0_1]
ID=1
ListName=130;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_1_0_2]
ID=1
ListName=255;0;260;1
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0