I tested in several versions of ProgDVB to receive from both LNBs.
It is not a problem of the driver http://www.creatix.de/support/download/ ... 01a_tv.zip the program Sceneo TVcentral Core scans both LNBs and receives TV from both LNBs.
I specified a switch and LNBs for Astra 19.2 and Hotbird 13.0 in ProgDVB.
But if I try to scan Hotbird I get only duplicate TV-Stations from Astra.
The following parameter are set in DiseqTree.ini, I am missing the diseqc parameter 1/2 or A/B. Are these defined at a different point?
Code: Select all
[Tuner_3]
ID=5
CableTransponderList=
Caption={BDA} 713x BDA DVBS Tuner
DevID=66FF86C802626461006465766984
[Tuner_3_0]
ID=2
Type=3
ListName=130;0;192;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
[Tuner_3_0_0]
ID=1
ListName=192;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_3_0_1]
ID=1
ListName=130;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0