Display posts from previous
Sort by

diseqc does not switch to second LNB

#1 by Rschnauzer
Hallo,

I tested in several versions of ProgDVB to receive from both LNBs.
It is not a problem of the driver http://www.creatix.de/support/download/ ... 01a_tv.zip the program Sceneo TVcentral Core scans both LNBs and receives TV from both LNBs.
I specified a switch and LNBs for Astra 19.2 and Hotbird 13.0 in ProgDVB.
But if I try to scan Hotbird I get only duplicate TV-Stations from Astra.
The following parameter are set in DiseqTree.ini, I am missing the diseqc parameter 1/2 or A/B. Are these defined at a different point?

Code: Select all

[Tuner_3]
ID=5
CableTransponderList=
Caption={BDA} 713x BDA DVBS Tuner
DevID=66FF86C802626461006465766984
[Tuner_3_0]
ID=2
Type=3
ListName=130;0;192;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
[Tuner_3_0_0]
ID=1
ListName=192;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_3_0_1]
ID=1
ListName=130;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
All actual transponders are stored in directory Win/Program Files/Transponders (0130.ini, 0192.ini, all.list) but while scanning Hotbird only {0} from {1} is displayed. How may I check whether the correct transponders are used?
TV: SAA7131, CTX 948 http://www.creatix.de/produkte/multimedia/ctx948.htm
OS: Vista Graph: NVIDIA GeForce 8860 GS, ProgDVB: 6.60.2, Smart MS 94BK DiseqC Multischalter LNB_A: Astra 19.2, LNB_B Hotbird 13.0

Re: diseqc does not switch to second LNB

#2 by Gompf
Hi,

Have you ever been able to resolve this issue ? I have this with a Terratec S2 usb and a Terratec S7, no matter what i do, it won't switch to the second port, and always returns the first port signal.

I tried many different version of ProgDVB, but the issue remains. MediaPortal, Transedit, and others can switch the ports. For Mediaportal it suffers from the same issue in fact, until the tuningspace is fixed to DVB-S in the settings, then it works.

/Gompf

Re: diseqc does not switch to second LNB

#4 by Gompf
It was automatically set to Terratec, but i also tried Azurwave and Microsoft Generic, all does not work.. which one you think i should change it to ?

BTW, I also have found another bug in This software, I have more than 20 BDA devices in the system, if all enable, ProgDVB will not see anymore BDA devices at all, the list of devices will stay empty.

/Gompf

Re: diseqc does not switch to second LNB

#6 by Gompf
With a few USB Controllers so i have enough bandwith.

10 x Terratec S7 usb
10 x Terratec S2 usb
8x AF9015 DVB-T Usb

I use this for my personal Mediaportal Server, to stream and transcode. I also use DVBLink to bridge to Mediacenter via Network, and Stream to my workplace in the far east so i have tv there.

I use Progdvb for a special transcoding need, but i can't use it now because of the diseqc issue. i read in the forum more and more, it seems this issue happen from time to time to people.

/Gompf