Re: SAT>IP Protocol support

#286
Prog wrote:Please try download "a" again. Updated with same version.
scan is currently running at time is no pids all seen

but what i not under stand sometime add you pids=0,1,16,17,18
and in the next call Play add you addpid=16 once more why?

in the first can you use Pids =0
in the next Request addpid =16
if you parsed 16
new Request with addpid=17
if that parsed too

make a new Request with delpid= 16,17

scan end with no found Services /Channels

the next request change then the Tuning Details with pids=0
and so Long

Re: SAT>IP Protocol support

#289
Prog wrote:Pids in first url not important. But do you have signal? I think problem on some other parameters.

ps: Yes, scanner wihtout pids=all - very long. It is normal(!!!).

yes Signal is present
sure it Need time but if you want try DVBviewer this is really fast without pids=all
Prog wrote:And so, I need good idea about debug of scanner. Now it is working on my TSS 400. May be delay too small? Try add 500ms in options->Scanner.

It is "fe" is correct?

ps: What most exotic sat>ip device? 4 DVB+S + DVBC+DVBT is maximum?
i can try with screw up the delay
fe was corret

the Minimum is an STB that can be used as SatIp> Server there is is it DVBS-1
but this info can be read and parsed from Device Description (upnp ssdp)

Re: SAT>IP Protocol support

#296
btw, what mean "503 Service Unavailable" for sat>ip?
14:31:03.501 - Start logging...
14:31:03.502 - ------ rtsp://192.168.88.24/?src=1&fe=1&freq=11747.0&sr=27500&pol=v&msys=dvbs2&mtype=8psk&fec=34&pids=0,1,16,17,18
14:31:03.531 - >> OPTIONS rtsp://192.168.88.24/?src=1&fe=1&freq=11747.0&sr=27500&pol=v&msys=dvbs2&mtype=8psk&fec=34&pids=0,1,16,17,18 RTSP/1.0
CSeq: 41
User-Agent: ProgDVB


14:31:03.535 - -- TS RTP Client
14:31:03.535 - >> SETUP rtsp://192.168.88.24/?src=1&fe=1&freq=11747.0&sr=27500&pol=v&msys=dvbs2&mtype=8psk&fec=34&pids=0,1,16,17,18 RTSP/1.0
CSeq: 42
Transport: RTP/AVP;unicast;client_port=60505-60506
User-Agent: ProgDVB


14:31:03.538 - !! RTSP/1.0 503 Service Unavailable
Content-Type:text/parameters
CSeq:42
Content-Length: 19

Re: SAT>IP Protocol support

#297
Prog wrote:btw, what mean "503 Service Unavailable" for sat>ip?
14:31:03.501 - Start logging...
14:31:03.502 - ------ rtsp://192.168.88.24/?src=1&fe=1&freq=11747.0&sr=27500&pol=v&msys=dvbs2&mtype=8psk&fec=34&pids=0,1,16,17,18
14:31:03.531 - >> OPTIONS rtsp://192.168.88.24/?src=1&fe=1&freq=11747.0&sr=27500&pol=v&msys=dvbs2&mtype=8psk&fec=34&pids=0,1,16,17,18 RTSP/1.0
CSeq: 41
User-Agent: ProgDVB


14:31:03.535 - -- TS RTP Client
14:31:03.535 - >> SETUP rtsp://192.168.88.24/?src=1&fe=1&freq=11747.0&sr=27500&pol=v&msys=dvbs2&mtype=8psk&fec=34&pids=0,1,16,17,18 RTSP/1.0
CSeq: 42
Transport: RTP/AVP;unicast;client_port=60505-60506
User-Agent: ProgDVB


14:31:03.538 - !! RTSP/1.0 503 Service Unavailable
Content-Type:text/parameters
CSeq:42
Content-Length: 19

in 503 Content is the reason defined type is text

can be wrong Parameter