Re: SAT>IP Protocol support

#264
I tried the 7.12.1 version.
There is now shown a signal on every transponder but no channels where found!

Somebody does have the 7.07.3c version that I can scan the sat for channels?

EDIT:
I found the 7.08 version on my desktop. There is channel scan working on SAT>IP

Re: SAT>IP Protocol support

#266
There is no option for the SAT>IP for DVB-C? Today I would have some time to test this. The screen shot from below is from the latest version 7.12.3
| WinXP SP3 or Win10 1709 | i5 660@3.33Ghz | 4 Gb RAM | ATI Radeon HD 5450 1Gb|
| TT S2-3200 | TT 1501| Astrometa| TT Infrared Receiver| Octagon SF4008 for streaming to ProgDVB|
| Prog demux |
| VMR7 | CyberlinK video decoder (MPEG2) and FFDShow for H264 - DXVA enabled |
| ProgAR | FFDShow audio | Audio processor enabled |
| Timeshift in RAM | Buffer size 2000 |
Attachments
DVB-C.JPG

Re: SAT>IP Protocol support

#267
Tested with DVB-S also but no channels found during the Scan. The following was done:

1. Start the Amiko HD 9260+
2. Enter menu>applications => The device is started and tuner released for Sat2IP
3. Start ProgDVB on already configured SAT>IP for DVB-S 9correct IP added)
4. Start Scan
Result: no channel found (nor any indication that it sees a signal level)

With the Big2Small application from the android marked in working fine on the same steps.
| WinXP SP3 or Win10 1709 | i5 660@3.33Ghz | 4 Gb RAM | ATI Radeon HD 5450 1Gb|
| TT S2-3200 | TT 1501| Astrometa| TT Infrared Receiver| Octagon SF4008 for streaming to ProgDVB|
| Prog demux |
| VMR7 | CyberlinK video decoder (MPEG2) and FFDShow for H264 - DXVA enabled |
| ProgAR | FFDShow audio | Audio processor enabled |
| Timeshift in RAM | Buffer size 2000 |
Attachments
logs.zip
(31.78 KiB) Downloaded 87 times

Re: SAT>IP Protocol support

#269
I have read a bit the research some guys did for a device from the same manufacturer and I haven't seen anything regarding all PID's. My assumption would be that is not supported... from what I see they do a get channels list and them start play. More info here: http://www.satelliteguys.us/xen/threads ... ws.344995/
| WinXP SP3 or Win10 1709 | i5 660@3.33Ghz | 4 Gb RAM | ATI Radeon HD 5450 1Gb|
| TT S2-3200 | TT 1501| Astrometa| TT Infrared Receiver| Octagon SF4008 for streaming to ProgDVB|
| Prog demux |
| VMR7 | CyberlinK video decoder (MPEG2) and FFDShow for H264 - DXVA enabled |
| ProgAR | FFDShow audio | Audio processor enabled |
| Timeshift in RAM | Buffer size 2000 |

Re: SAT>IP Protocol support

#270
seba wrote:I have read a bit the research some guys did for a device from the same manufacturer and I haven't seen anything regarding all PID's. My assumption would be that is not supported... from what I see they do a get channels list and them start play. More info here: http://www.satelliteguys.us/xen/threads ... ws.344995/

i think it is not an sat>ip device

but you can test it with the attached tool
SatIp Sample.zip
(238.16 KiB) Downloaded 85 times