Page 15 of 24
Re: SAT>IP Protocol support
Posted: Wed Jun 10, 2015 7:00 am
by evarost
Prog wrote:Please wait new version after 16.06
Hi,
It will incorporate DVB-T support?
Re: SAT>IP Protocol support
Posted: Thu Jun 11, 2015 5:06 pm
by Diefenthal
evarost wrote:Prog wrote:Please wait new version after 16.06
Hi,
It will incorporate DVB-T support?
do you want really a dead horse ?
think Dvb T2 and the horse isnt dead instead to Dvb T
Re: SAT>IP Protocol support
Posted: Fri Jun 12, 2015 10:16 am
by evarost
Diefenthal wrote:evarost wrote:Prog wrote:Please wait new version after 16.06
Hi,
It will incorporate DVB-T support?
do you want really a dead horse ?
think Dvb T2 and the horse isnt dead instead to Dvb T
SAT>IP support for DVB-T2 includes support for DVB-T;
so thank you for incorporate suport for the rest of standards: DVB-T/T2/C/C2.
Regards.
Re: SAT>IP Protocol support
Posted: Tue Jun 16, 2015 8:10 am
by Prog
Check "b". DVB-T added, but I am not test it.
Re: SAT>IP Protocol support
Posted: Wed Jun 17, 2015 10:59 am
by evarost
Prog wrote:Check "b". DVB-T added, but I am not test it.
Good job and Thank you!
Testing version "c" (last). Initial feedback:
- ProgDVB can speak with the SAT>IP DVB-T server.
- ProgDVB can execute the scanning process, but only found some channels on some frequencies.
- When Manual scan over active frequencies the lock works, but no channel found... after several minutes of RE-scan, some channel is found (without name, as it found "TV Service XXX").
- When playing progams scanned the Input Traffic Information shows good traffic (minimal lost=0).
So I feel there is some trouble with the scanning process.
Re: SAT>IP Protocol support
Posted: Wed Jun 17, 2015 1:30 pm
by Prog
dvb-s is working? Can you test in logs DVB-T parameters from ProgDVB?
Re: SAT>IP Protocol support
Posted: Wed Jun 17, 2015 1:38 pm
by Diefenthal
if you mean me with" is dvbs working "
then not with the triax tss 400
if you want can you test it over teamviewer
Re: SAT>IP Protocol support
Posted: Wed Jun 17, 2015 2:01 pm
by evarost
Prog wrote:dvb-s is working?
Yes with my ALi STB !!
Re: SAT>IP Protocol support
Posted: Wed Jun 17, 2015 2:06 pm
by evarost
Hi Prog,
With DVB-T all channels (well scanned or not) are choppy (video and audio). The Input Traffic Info now shows (not before) "Minimal lost" around ~2%. I feel the problem is the size of RTP/UDP packets or any other similar problem.
I'm testing with minisatip.
Re: SAT>IP Protocol support
Posted: Wed Jun 17, 2015 3:44 pm
by Prog
Send me logs. What last good version?
Re: SAT>IP Protocol support
Posted: Wed Jun 17, 2015 4:53 pm
by evarost
Prog wrote:Send me logs. What last good version?
Hi Prog,
In this case, I review the logs from ProgDVB and NOTHING is different from DVB-S over SAT>IP, but with DVB-T the channels are choppy.
I feel is better that you install minisatip in any of your computers (Linux) and simply connect one DVB-T2 USB tunner to check the functionality. You can debug inline!
http://github.com/catalinii/minisatip
Re: SAT>IP Protocol support
Posted: Wed Jun 17, 2015 5:19 pm
by Prog
Hm. Problem only on DVB-S?
ps: I am not have DVB-T in this place.
Re: SAT>IP Protocol support
Posted: Thu Jun 18, 2015 9:33 am
by evarost
Prog wrote:Hm. Problem only on DVB-S?
ps: I am not have DVB-T in this place.
Hi,
In my case DVB-S is working... It seems that is Diefenthal that has problems with DVB-S and the triax tss 400 server...
Related to DVB-T in your place... I'm sorry! I'll think on an alternative. However, please, try to setup a minisatip server in your LAN. You can check your software with this software-only SAT>IP server for testing. If ProgDVB works with this server in DVB-S mode it should work with DVB-T, as it only changes the tuner parameters.
Re: SAT>IP Protocol support
Posted: Thu Jun 18, 2015 11:11 am
by Prog
But why you ask DVB-T if you not have device? I am still not have reason for SatIP DVB-T.
Re: SAT>IP Protocol support
Posted: Thu Jun 18, 2015 2:39 pm
by evarost
Prog wrote:But why you ask DVB-T if you not have device? I am still not have reason for SatIP DVB-T.
Sorry?
I have a Raspi with minisatip for DVB-T and a hardware DVB-S2 server. That I like is use ProgDVB as a client for both protocols. Where is the problem?
Also you can test minisatip implementation in your land, because if you don't have DVB-T signals, you can use DVB-S signals operating with minisatip. If ProgDVB is compatible with minisatip for DVB-S, then it will be compatible with DVB-T, as the Linux DVB-API is used for accessing to the tuner and it's equal for -T/-S-/-C/-S2/-T2/-C2.
Please, try it!