Page 18 of 24
Re: SAT>IP Protocol support
Posted: Thu Dec 24, 2015 3:02 pm
by Diefenthal
logs old working Version
Re: SAT>IP Protocol support
Posted: Thu Dec 24, 2015 3:26 pm
by Diefenthal
and here from the current release 7.12 a
Re: SAT>IP Protocol support
Posted: Thu Dec 24, 2015 3:58 pm
by Prog
Please try "b"
Re: SAT>IP Protocol support
Posted: Thu Dec 24, 2015 4:22 pm
by Diefenthal
is better but far away from perfect
Re: SAT>IP Protocol support
Posted: Thu Dec 24, 2015 5:04 pm
by Prog
Still not channel after scan?
Re: SAT>IP Protocol support
Posted: Thu Dec 24, 2015 5:17 pm
by Diefenthal
after full scan of astra 19,2° was 16 Services found! with other words there is many lost
Re: SAT>IP Protocol support
Posted: Fri Dec 25, 2015 4:41 am
by Prog
I am not have good idea. But try manual search of add delay in scanner options. May be need wait more time.
Re: SAT>IP Protocol support
Posted: Fri Dec 25, 2015 5:25 am
by Diefenthal
the base question is what you havd changed between Version 7.07.03c and 7.12.0b
with 7.07.03 give it this Problems not
Re: SAT>IP Protocol support
Posted: Tue Dec 29, 2015 7:44 am
by Portisch
I tried the 7.12.1 version.
There is now shown a signal on every transponder but no channels where found!
Somebody does have the 7.07.3c version that I can scan the sat for channels?
EDIT:
I found the 7.08 version on my desktop. There is channel scan working on SAT>IP
Re: SAT>IP Protocol support
Posted: Tue Dec 29, 2015 9:02 am
by Prog
Please wait some days for new update. I will inform you in this thread.
Re: SAT>IP Protocol support
Posted: Sat Jan 09, 2016 7:44 am
by seba
There is no option for the SAT>IP for DVB-C? Today I would have some time to test this. The screen shot from below is from the latest version 7.12.3
Re: SAT>IP Protocol support
Posted: Sat Jan 09, 2016 8:31 am
by seba
Tested with DVB-S also but no channels found during the Scan. The following was done:
1. Start the Amiko HD 9260+
2. Enter menu>applications => The device is started and tuner released for Sat2IP
3. Start ProgDVB on already configured SAT>IP for DVB-S 9correct IP added)
4. Start Scan
Result: no channel found (nor any indication that it sees a signal level)
With the Big2Small application from the android marked in working fine on the same steps.
Re: SAT>IP Protocol support
Posted: Sat Jan 09, 2016 11:18 am
by Prog
Is is device support pids=all?
ps: New version still not ready. But I am working on Android version sat2ip also.
Re: SAT>IP Protocol support
Posted: Sat Jan 09, 2016 11:36 am
by seba
I have read a bit the research some guys did for a device from the same manufacturer and I haven't seen anything regarding all PID's. My assumption would be that is not supported... from what I see they do a get channels list and them start play. More info here:
http://www.satelliteguys.us/xen/threads ... ws.344995/
Re: SAT>IP Protocol support
Posted: Sat Jan 09, 2016 4:19 pm
by Diefenthal
seba wrote:I have read a bit the research some guys did for a device from the same manufacturer and I haven't seen anything regarding all PID's. My assumption would be that is not supported... from what I see they do a get channels list and them start play. More info here:
http://www.satelliteguys.us/xen/threads ... ws.344995/
i think it is not an sat>ip device
but you can test it with the attached tool