I have purchased 5 of this sat usb device but it finds no channels.
It seems it is due to being different to the previous versions but there is no way of identifying the differences.
On linux, this patch needs to be applied - not sure if this means anything prog or if anything can be done within progdvb itself.
I can send you one if you like?
kernel linux patch for this device here >
http://outernet-project.github.io/orx-i ... ules.patch
(note i've not tried on linux yet)
Re: HDStar DVB-S2 v3 - finds no channels
#3hi,
Yes i do, and it correctly identifies in properties as a geniatech
using 32bit version of progdvb professional 7.16.09
-
it scans fine but finds nothing. the signal bar seems to be unaffected when you unplug the coax (this is what others are reporting without the linux patch).
The coax is fine as i'm using it with my TBS cards.
I'll send you one for free (send address in pm and i'll send tomorrow).
Yes i do, and it correctly identifies in properties as a geniatech
using 32bit version of progdvb professional 7.16.09
-
it scans fine but finds nothing. the signal bar seems to be unaffected when you unplug the coax (this is what others are reporting without the linux patch).
The coax is fine as i'm using it with my TBS cards.
I'll send you one for free (send address in pm and i'll send tomorrow).
Re: HDStar DVB-S2 v3 - finds no channels
#4you may move this thread to hardware section.
i didn't see.
i didn't see.
Re: HDStar DVB-S2 v3 - finds no channels
#5Try change Settings->[device name] for example symbolrate options.
Re: HDStar DVB-S2 v3 - finds no channels
#6Hi and thanks.
not sure what you mean. do you mean for each transponder?
i'm using a fixed 28.2e presets atm
-
I tried the khz symbol rate change, but no affect
not sure what you mean. do you mean for each transponder?
i'm using a fixed 28.2e presets atm
-
I tried the khz symbol rate change, but no affect
Re: HDStar DVB-S2 v3 - finds no channels
#7Try change TIF using. Also mode to Microsoft.
But I am not can fix driver.
But I am not can fix driver.
Re: HDStar DVB-S2 v3 - finds no channels
#8can i send you to play with?Prog wrote:Try change TIF using. Also mode to Microsoft.
But I am not can fix driver.
maybe some commands/communication are messed up and a workaround could be done in progdvb?
if you cannot fix then it's no problem
pm where to send
Re: HDStar DVB-S2 v3 - finds no channels
#9not sure if this helps with debugging
when first start scanning, the level is very low.. the more scanning it does, the higher it gets.. it builds up.
if restart progdvb, and start scanning again, the level is where it left off (even though scanning from scratch).
i wonder if some commands are inverted or mixed up.
i cannot find anyone anywhere running this device on windows atm.
-
tried microsft bda, and enable/disabling all the other options.
when first start scanning, the level is very low.. the more scanning it does, the higher it gets.. it builds up.
if restart progdvb, and start scanning again, the level is where it left off (even though scanning from scratch).
i wonder if some commands are inverted or mixed up.
i cannot find anyone anywhere running this device on windows atm.
-
tried microsft bda, and enable/disabling all the other options.
Re: HDStar DVB-S2 v3 - finds no channels
#10there is a new driver release for this to work for the OEM version of HDStar v3
https://mega.nz/#!kE0nDYwI!S8r9ekRIethv ... eKe2Je-agU
now works flawlessy
https://mega.nz/#!kE0nDYwI!S8r9ekRIethv ... eKe2Je-agU
now works flawlessy
Re: HDStar DVB-S2 v3 - finds no channels
#11No any problems with ProgDVB in new driver?
Thanks for information.
Thanks for information.
Re: HDStar DVB-S2 v3 - finds no channels
#12no it works perfect with all default settings, works as geniatch device and as microsoft bda
very fast channel switching.
i also notice on linuxtv it uses same hardware as s905 dvbsky, although the driver did not work.. (it installed fine, but blue screen when try to scan)
very fast channel switching.
i also notice on linuxtv it uses same hardware as s905 dvbsky, although the driver did not work.. (it installed fine, but blue screen when try to scan)
Re: HDStar DVB-S2 v3 - finds no channels
#13Also -
there are 2x different HDstar v3
the retail version worked with old driver
the oem version needs new driver that i posted.
there are 2x different HDstar v3
the retail version worked with old driver
the oem version needs new driver that i posted.