Page 1 of 1
Problem with Geniatech Usb Sat Box
Posted: Mon Jun 30, 2008 9:12 pm
by VakoGB
I have Geniatech USB Sat Box, but I can’t to watch programs with SIR-FEC SID-VPID 30000-7/8. Is possible to watch like these channels with this hardware and if not which USB hardware is possible to watch these channels?
Posted: Tue Jul 01, 2008 8:29 am
by Juergen
Sorry, but that symbol rate (30000 ksps) and FEC (7/8) are not uncommon, and they alone should not be the reason for your problem.
You did not post any System ID or Video ID, but anyway, those would only be helpful together with satellite position and transponder.
So, what satellite position are you talking about, what transponder(s)?
What exactly happens, if you try? Do you get good L & Q readings there? If yes, do you find any station listed if you scan that transponder (even manually)?
Details rule.
And precision is a must, if talking technical issues.
.
Posted: Tue Jul 01, 2008 8:45 am
by Prog
What satelite?
More info abuot this problem
Posted: Tue Jul 01, 2008 5:38 pm
by VakoGB
I wish to watch some free programs on 39.0E Hellas Sat 2. I watch on transponder 10956-V -4123 with L=62% and Q=80% the signal is good and video and audio perfect. But on transponder 12647-H-30000 with L=68% and Q=100% the video looks mosaic and audio is very bad not only on TV and on Radio channels is the same. My CPU is on 40% and RAM 500MB from (max 1GB). I try with different decoder is the same.
Posted: Tue Jul 08, 2008 2:04 pm
by Juergen
CPU -> 40% of what?
With Q = 100% this is not supposed to be a reception problem.
Is it normal audio there or AC3?
Dose this USB device share a USB host with a slower (USB 1.x) device? This MUST not be.
Are you using an onboard USB port or one on a PCI card? In any case, try to update the drivers for it and the Geniatech.
What happens, if you playback a .mpg recording from that transponder in a normal media player software?
If that's OK, try to change the renderer in ProgDVB.
Try to use exactly the same codec the player has.