I need a remote control for ProgDVB

#1
Hi,
I own a TechnoTrend S-1500 PCI DVB-S Card and use ProgDVB to watch TV / listen to radio.
My Problem: The remote control that was with the PCI card is damaged and I need a new one.
The old remote was IR with a cable to the card. It worked good with ProgDVB (just the names of the buttons was strange in ProgDVB).
My Question: Can i buy any USB-linked remote and connect it to the PC and will ProgDVb "see" it? have i to disable the old remote device in some way?
And if not do you know a special good remote that works goodwith ProgDVB ?

thx
ChiefAlex

(sorry for bad english, im german)

#2
As long as the original IR receiver still is OK, you can try almost any Philips TV (compatible) handset, including universal ones, set to one of the most common Philips TV codes.
The internal system control hardware of the TT concept in fact bases on Philips TV technology.
I am using universal remotes with my Nexus (TT HW rev. 2.2, ~ TT DVB-S 2200), for many years with great success. More keys, longer operating range, better mechanics...
Your device should be HW rev. 1.5, of the same base concept.

A separate USB attached remote won't address the TT hardware or ProgDVB, but Windows system, as a
Human Interface Device, i.e. keyboard emulation.
Means, even inside of ProgDVB, it would act like a keyboard. And then setting the controls means, to play around with keyboard controls, not remote.
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!



I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!


1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>