Cannot read CAM with Skystar USB 2 HD CI

#1
Hi to all,
i'm testing this new Technisat card Skystar USB 2 HD CI

It works OK with ProgDVB 6, except reading CAM.
I try with a Diablo 2.3 and T-rex 4.1

If open CAM INTERFACE it remain on "waiting data"

CAMs works ok with DvbViewer PRO.
I have a Skystar HD2 + CI slot too and with this CAM is ok, so i think it's software problem.

I use last driver from Technisat on XP MCE SP3

Re: Cannot read CAM with Skystar USB 2 HD CI

#2
scaistar wrote:Hi to all,
i'm testing this new Technisat card Skystar USB 2 HD CI

It works OK with ProgDVB 6, except reading CAM.
I try with a Diablo 2.3 and T-rex 4.1

If open CAM INTERFACE it remain on "waiting data"

CAMs works ok with DvbViewer PRO.
I have a Skystar HD2 + CI slot too and with this CAM is ok, so i think it's software problem.

I use last driver from Technisat on XP MCE SP3


I have the same probelm.

did you already have a solution?

Is it realy problem?

#4
Using progdvb 6.01 for XP, with my twinhan CI, i have a simular problem:
@ cam interface, I do get the first menu, but after i choose any option, it says menu closed!

I must say, decoding scrabled signals works fine! so, it 's not a real problem to me.

(For the record: I use an official Canal digitaal cam and smartcard)

Update: could be driver-isue, since installed the latest drivers for the Twinhan-card and switched from "Twinhan DTV" to "Digital TV", I get a simular reaction from Digital TV.
Pentium IV 3.0 GHz, 2GB DDR2;
Win XP mediacentre SP2, ProgDvb 6.01, Digital TV 3.4;
Twinhan DVB-S CI PCI [AD-SP300 (1034) ver:1.2 Mantis];
-&- Driver: "MantisDriver_V1.1.0.400"
-&- Official "Canal Digitaal" Cam and Smartcard;
Technisat Skystar 2 TV PCI;
-&- Driver: 4.5.0.0
2x1 DiSEqC Switch;
Inverto Silver Tech 0.2dB Single Output LNB @ Astra 23,5';
...LNB @ Astra 19,5';
78cm Triax;

#5
Suppose,this is about just another BDA device...

Read here:
viewtopic.php?p=12353
May well be, you'd get an idea, what to look after...

CI, DiSEqC, DVB-S2, all those switches are NOT implemented with BDA, so they require hardware specific device settings (if available yet).
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!



I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!


1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
cron