I am testing ProgDVB Pro x64 with a view to purchase but cannot get it to operate the diseqc switch.

My PC card is a Kworld DVB-S 100 PCI card

All my dish and switch works fine with my Manhattan Plaza ST100 box and my Kworld card works fine without the switch by just connecting one lnb directly to the card.

The diseqc switch also works with the supplied software that came with the card but I do not like it and is difficult to operate plus does not support HD channels.

I have tried setting the delay after setting transponder time in steps of 10 up to 200ms (setting > options > other)

I have tried setting the device options to all the ones listed and re-starting the program. Still does not work. Now set back again to Kworld.

The card device is listed in ProgDVB devices as {BDA} DigiGo DVBS BDA Tuner/Demod

The switch has no marks on it but I have a small paper with it which just says...

Standard Diseqc / ToneBurst switch - 4-way

CE-approved. Made in EU.

and a small connection diagram.

My system.

Windows 7 x64 (Ultimate 64 bit version)
ProgDVB Pro 64bit Version 6.41.01
The latest Kworld 64 bit drivers.

Motherboard: ECS Elitegroup GS7610 Ultra V1.1C
CPU: AMD Athlon 64 3200+
Graphics card: Asus EAH 4350 Silent/D1/256M D2/ (LP) <GA> PCIe 16 card
TV Card: Kworld DVB-S 100 PCI card
Memory: 2Gb (2 x 1GB PC2700) Kingston DDR 266 Mhz
Sound: Sound Blaster Audigy SB1395 PCI Card
Hard Drives: C: WD 80Gb, D: WD 200Gb, E: WD 640Gb
DVD RW: LG Lightscribe GH22LP20
Power supply: 500W
Fans: Power, Processor, Chassis

The Kworld card shows as 2 devices in windows device manager...

Conexant 2388x AVS Video Capture (DVB-S)
Conexant 2388x Device

I hope you can help as a few of my friends will buy this card and your software if I can get this to work.

Chrisupyonder