Page 1 of 1
No Signal for Dvb-S2 channels using my Skystar USB2 HD Ci
Posted: Thu May 05, 2011 7:21 am
by ahyousoft
Hello;
I am experiencing this problèm with all programs i have tried
dvb-s channels works fine but no dvb-s2 channels
i am using the latest driver soft_skystar_usb2_hd_ci_v1_3_6795 from technisat
the pictures within this message shows my system configuration
please help me
thnks
Re: No Signal for Dvb-S2 channels using my Skystar USB2 HD C
Posted: Thu May 05, 2011 11:27 am
by Prog
Check settings->Device options. Must be Azurewave selected.
Re: No Signal for Dvb-S2 channels using my Skystar USB2 HD C
Posted: Thu May 05, 2011 12:15 pm
by ahyousoft
like this?
still the same pb
regards
Re: No Signal for Dvb-S2 channels using my Skystar USB2 HD C
Posted: Thu May 05, 2011 12:19 pm
by ahyousoft
by the way;
is this normal
it's showed as dvbs card
technisat UDST7000bda DVBS tuner??????
is there apb with the driver???
Re: No Signal for Dvb-S2 channels using my Skystar USB2 HD C
Posted: Thu May 05, 2011 12:36 pm
by Prog
Yes. Looks good. try Microsoft mode also.
Re: No Signal for Dvb-S2 channels using my Skystar USB2 HD C
Posted: Thu May 05, 2011 1:24 pm
by ahyousoft
also doesn't work
Is there anybody who has the same box and succeeded to watch dvb-s2 channels with it?
Re: No Signal for Dvb-S2 channels using my Skystar USB2 HD C
Posted: Thu May 05, 2011 1:44 pm
by Prog
I have this box and no problem with azurewave mode. try reinstall driver.
Re: No Signal for Dvb-S2 channels using my Skystar USB2 HD C
Posted: Thu May 05, 2011 2:22 pm
by ahyousoft
i am using this driver: soft_skystar_usb2_hd_ci_v1_3_6795
is it the same with you?
also the server4pc didn't install with it; is that normal?
are u running under windows xp sp3 also?
sorry for all these questions; it just that i have been trying to view dvb-s2 channels for a week now without any luck
i also use a laptop and a motor; does those affect?
best regards
Re: No Signal for Dvb-S2 channels using my Skystar USB2 HD C
Posted: Thu May 05, 2011 2:52 pm
by Prog
I have motor also. But not can test in XP. May be some problem with XP...
Re: No Signal for Dvb-S2 channels using my Skystar USB2 HD C
Posted: Thu May 05, 2011 3:00 pm
by ahyousoft
do you use win7 or vista?
x64 or x86?
Re: No Signal for Dvb-S2 channels using my Skystar USB2 HD C
Posted: Fri May 06, 2011 6:53 am
by Prog
win7/x64. But I am not have reports about this problem from other users. I think you have problem with driver or driver settings.
Re: No Signal for Dvb-S2 channels using my Skystar USB2 HD C
Posted: Fri May 06, 2011 10:04 am
by ahyousoft
thanks for your replys
here is picture of my driver configuration
and the transponder configuration
is it wright?
Re: No Signal for Dvb-S2 channels using my Skystar USB2 HD C
Posted: Sat May 07, 2011 9:36 am
by ahyousoft
well, any ideas?
Re: No Signal for Dvb-S2 channels using my Skystar USB2 HD C
Posted: Sat May 07, 2011 9:38 am
by Prog
I am not have ideas. This is good device for ProgDVB and I am not found problems on picture. Try reinstall driver again and start original software.