#33
Using the latest versions, i can't refresh the channellist from the server to the clients any more.

When i try, the servers says "Engine MultiProcess Error" "To large size of slot 0" and then restarts.

Disabling the Stability mode does not solve the problem, the server just freezes then.

#34
Flocki wrote:Using the latest versions, i can't refresh the channellist from the server to the clients any more.

When i try, the servers says "Engine MultiProcess Error" "To large size of slot 0" and then restarts.
please run progdvb with /debug on client, and show log.

#35
I hope, this ist the correct logfile.

Code: Select all

New state :	New state :(hr=0x5)
New state :	New state :(hr=0x5)
New state :	New state :(hr=0x5)
New state :	New state :(hr=0x5)
New state :	New state :(hr=0x5)
New state :	New state :(hr=0x5)
New state :	New state :(hr=0x2)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)

#38
Hello,
i am using ProgDVB Standard 6.23.02 with BDA DVB-T.

I have configured the Prog Media Server on my desktop machine with standard settings. My notebook (the client) is able to connect to the corresponding server and to receive the channel list. Now, it is possible to see the channel which is chosen on the server machine.
Unfortunately, i am not able to change to another channel by the client. After changing the channel it shows that there is no more traffic and you do not see any image on the client as well as on the server. You have to click on the server to another channel to get traffic/image again.

I don't know what to do. :(

#40
Are you able to record on the client?
Does this give a file, than can play in another player, like WMP, VLC or MPC?
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!



I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!


1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

0kb ts file in record

#41
I've tried to record but i can find after a period of 1minute a file of 0kb...

It's strange.. I can see traffic on client shown near channell name. but no audio, video or record... firewall is down in server and client. Progdvb 4 work... only progdvb 6 don't work..

progdvb worked only one time after i reinstalled it on server.. but after i closed it and restarted, on client no video audio etc..

My system is a windows 7 x64.

boh.. :(

#42
So your client does not find the audio and video streams. No idea on a possible reason, sorry.
Someone else, perhaps :?:
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!



I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!


1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

progdvb 6.25 server w7x32 client w7x64 No Firewall NO stream

#44
I can change channells fram client to server, I found the channells list from client, but no stream detected.. it's not the problem of no audio or video, here there is no stream...

LOG with prog dvb/debug

Error url
Host not found
Unable to start media receiver by url
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
Error url
Host not found
Unable to start media receiver by url
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
Error url
Host not found
Unable to start media receiver by url
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
Error url
Host not found
Unable to start media receiver by url
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
Error url
Host not found
Unable to start media receiver by url
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
Error url
Host not found
Unable to start media receiver by url
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
Error url
Host not found
Unable to start media receiver by url
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
Error url
Host not found
Unable to start media receiver by url
New state : New state :(hr=0x5)
cron