Page 3 of 8

Audio Stream on Client

Posted: Fri Feb 22, 2008 6:20 pm
by eziitiss
Is it possible to change the audio stream on ProgDVB media client? It shows all the audio streams, but when I change them on client, nothing happens.

Server and Cieent @ v.4.89.04

.

Posted: Fri Feb 22, 2008 7:12 pm
by Prog
Try last ProgDVB and last client/server. It must work, but I am not sure about standart version.

Posted: Mon Sep 21, 2009 5:12 pm
by Flocki
Using the latest versions, i can't refresh the channellist from the server to the clients any more.

When i try, the servers says "Engine MultiProcess Error" "To large size of slot 0" and then restarts.

Disabling the Stability mode does not solve the problem, the server just freezes then.

Posted: Mon Sep 21, 2009 8:16 pm
by Akad
Flocki wrote:Using the latest versions, i can't refresh the channellist from the server to the clients any more.

When i try, the servers says "Engine MultiProcess Error" "To large size of slot 0" and then restarts.
please run progdvb with /debug on client, and show log.

Posted: Tue Sep 22, 2009 6:32 pm
by Flocki
I hope, this ist the correct logfile.

Code: Select all

New state :	New state :(hr=0x5)
New state :	New state :(hr=0x5)
New state :	New state :(hr=0x5)
New state :	New state :(hr=0x5)
New state :	New state :(hr=0x5)
New state :	New state :(hr=0x5)
New state :	New state :(hr=0x2)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)
New state :	New state :(hr=0x4)

Posted: Wed Sep 23, 2009 7:11 am
by Akad
Flocki wrote:I hope, this ist the correct logfile.
Is if full log?

Posted: Thu Sep 24, 2009 8:30 pm
by Flocki
This is the complete "ProgDvb.log"

Posted: Sun Nov 15, 2009 2:12 pm
by playmyskay
Hello,
i am using ProgDVB Standard 6.23.02 with BDA DVB-T.

I have configured the Prog Media Server on my desktop machine with standard settings. My notebook (the client) is able to connect to the corresponding server and to receive the channel list. Now, it is possible to see the channel which is chosen on the server machine.
Unfortunately, i am not able to change to another channel by the client. After changing the channel it shows that there is no more traffic and you do not see any image on the client as well as on the server. You have to click on the server to another channel to get traffic/image again.

I don't know what to do. :(

No audio, No video with latest progdvb con prog media client

Posted: Thu Dec 03, 2009 9:48 am
by olgos762
I can't see video but a recieve traffic from server.. I installed elecard used also registrer ed unregister files for elecard codecs....

I don't know what to do..

I can change channells... fram client to server and from server to client..

but no video or audio on client...

only see traffic

there is no firewall on client or server..

Any ideas??

Best regards..

Posted: Fri Dec 04, 2009 12:23 am
by Juergen
Are you able to record on the client?
Does this give a file, than can play in another player, like WMP, VLC or MPC?

0kb ts file in record

Posted: Fri Dec 04, 2009 9:28 am
by olgos762
I've tried to record but i can find after a period of 1minute a file of 0kb...

It's strange.. I can see traffic on client shown near channell name. but no audio, video or record... firewall is down in server and client. Progdvb 4 work... only progdvb 6 don't work..

progdvb worked only one time after i reinstalled it on server.. but after i closed it and restarted, on client no video audio etc..

My system is a windows 7 x64.

boh.. :(

Posted: Sat Dec 05, 2009 1:06 am
by Juergen
So your client does not find the audio and video streams. No idea on a possible reason, sorry.
Someone else, perhaps :?:

Re: No audio, No video with latest progdvb con prog media cl

Posted: Sat Dec 05, 2009 12:35 pm
by Akad
olgos762 wrote: Any ideas??
Try to run progdvb.exe with /debug, than try to watch tv on client. Any error message? Please show log (progdvb.log).

progdvb 6.25 server w7x32 client w7x64 No Firewall NO stream

Posted: Sun Dec 06, 2009 11:11 am
by olgos762
I can change channells fram client to server, I found the channells list from client, but no stream detected.. it's not the problem of no audio or video, here there is no stream...

LOG with prog dvb/debug

Error url
Host not found
Unable to start media receiver by url
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
Error url
Host not found
Unable to start media receiver by url
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
Error url
Host not found
Unable to start media receiver by url
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
Error url
Host not found
Unable to start media receiver by url
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
Error url
Host not found
Unable to start media receiver by url
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
Error url
Host not found
Unable to start media receiver by url
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
Error url
Host not found
Unable to start media receiver by url
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
New state : New state :(hr=0x5)
Error url
Host not found
Unable to start media receiver by url
New state : New state :(hr=0x5)

Re: progdvb 6.25 server w7x32 client w7x64 No Firewall NO st

Posted: Sun Dec 06, 2009 11:50 am
by Akad
olgos762 wrote: Error url
Host not found
Unable to start media receiver by url
New state : New state :(hr=0x5)
What version of progDVB on client?
Are you setup proxy server on ProgDVB? If it is - please turn off and try again. If not - please show any url of channel on client (channel->right click->channel props.->URL).