Page 3 of 5

Re: avermedia td310 и PLP не находит все каналы

Posted: Wed Mar 13, 2019 9:59 pm
by crackname
Try the new attached file, from the log it doesn't detect the TD310 extension needed for PLP. I hope it'll work now !!

Re: avermedia td310 и PLP не находит все каналы

Posted: Wed Mar 13, 2019 10:12 pm
by NSGrid
does not work, finds only 8 channels from the multiplex, but should 10
ITE.rar
(1.06 KiB) Downloaded 309 times

Re: avermedia td310 и PLP не находит все каналы

Posted: Wed Mar 13, 2019 10:14 pm
by crackname
NSGrid wrote:
Wed Mar 13, 2019 10:12 pm
does not work, finds only 8 channels from the multiplex, but should 10
ITE.rar
So the PLP is Not Working ?? or some are ?

Does PLP 0 & 1 work and the other not work ??


Please try the new attached file, the module was using an old code, sorry about that.

Re: avermedia td310 и PLP не находит все каналы

Posted: Wed Mar 13, 2019 10:25 pm
by NSGrid
I understand that only the PLP 0 works. I, for example, attach to you a PDF file, where there are tables of frequency channels in the DVB-T2 format in the Moscow region, indicating the PLP number
Channels.zip
(181.94 KiB) Downloaded 319 times

Re: avermedia td310 и PLP не находит все каналы

Posted: Wed Mar 13, 2019 10:28 pm
by crackname
NSGrid wrote:
Wed Mar 13, 2019 10:25 pm
I understand that only the PLP 0 works. I, for example, attach to you a PDF file, where there are tables of frequency channels in the DVB-T2 format in the Moscow region, indicating the PLP number
Channels.zip
Please try the previous attached file, it should work now (I hope), before I go to sleep :)

Re: avermedia td310 и PLP не находит все каналы

Posted: Wed Mar 13, 2019 10:35 pm
by NSGrid
Hooray! It works now!
PLP.jpg
Here are the logs.
ITE.zip
(974 Bytes) Downloaded 316 times

Re: avermedia td310 и PLP не находит все каналы

Posted: Wed Mar 13, 2019 10:36 pm
by crackname
NSGrid wrote:
Wed Mar 13, 2019 10:35 pm
Hooray! It works now!
PLP.jpg
Here are the logs.
ITE.zip
Glad that it work :) .
Off I go to bed; have a nice day.

Re: avermedia td310 и PLP не находит все каналы

Posted: Wed Mar 13, 2019 10:54 pm
by NSGrid
Thank! Good night! :D

I also hope to understand how to make the DVB-C mode work in the td310 (in the official software Avermedia works), because I still have some cable channels on the cable network.
But about finding cable channels, unfortunately, does not find any (although the native software Avermedia finds)
DVB-C.jpg

Re: avermedia td310 и PLP не находит все каналы

Posted: Thu Mar 14, 2019 8:20 am
by crackname
NSGrid wrote:
Wed Mar 13, 2019 10:54 pm
Thank! Good night! :D

I also hope to understand how to make the DVB-C mode work in the td310 (in the official software Avermedia works), because I still have some cable channels on the cable network.
But about finding cable channels, unfortunately, does not find any (although the native software Avermedia finds)
DVB-C.jpg
I will try to look if I can find a way to switch from dvbt to dvbc in driver.

Re: avermedia td310 и PLP не находит все каналы

Posted: Thu Mar 14, 2019 4:56 pm
by crackname
Hello @NSGrid

If you can test the attached eBDA module; it should now support scanning for new PLP, and have a faster channel switch.

For DVB-C, try deselecting the DVB-T tuner, and do a scan and see if it picks anything, if it's still doesn't work, I will give you another version that use the BlindScan feature of the card for DVB-C to test.

Thank you

Re: avermedia td310 и PLP не находит все каналы

Posted: Thu Mar 14, 2019 9:04 pm
by NSGrid
Greetings!
Did as you said in the TV sources ProgDVB
{BDA} Avermedia TD310 BDA C Filter - chose
{BDA} Avermedia TD310 BDA Filter - uncheck
I tested your file. But, unfortunately, the channels were not found. I attach the logs, although they are very small. Another point is that the logs would be saved, as we know, to run the ProgDVB as an administrator. In this mode, I can not enter the manual channel search - the ProgDVB crashes (Under the adminstrator, only a full automatic channel search worked, although the channels were not found). If I run as a regular user (he is also an admin), manual search works, but still does not find cable channels.

Code: Select all

[14-03-0119 23:40:29] - BdaExt_GetOfflineInfo(...): CALLED
[14-03-0119 23:40:33] - CBDAExt::CBDAExt(...): AFA => Mercury Supported
[14-03-0119 23:40:33] - CBDAExt::CBDAExt(...): EEPROM DEVICEID 07CA:1871
[14-03-0119 23:40:33] - CBDAExt::CBDAExt(...): ITE => Omega Supported
[14-03-0119 23:40:33] - CBDAExt::CBDAExt(...): DriverPID=93051000, DriverVersion=13.111.4 (13011104), FwVersion_LINK=0.0.0 (0), FwVersion_OFDM=0.0.0 (0), TunerID=38
[14-03-0119 23:40:33] - CBDAExt::CBDAExt(...): AVERTV 9303 => 1
[14-03-0119 23:40:33] - CBDAExt::CBDAExt(...): AVERTV 9303 => 2
[14-03-0119 23:40:33] - CBDAExt::CBDAExt(...): AVERTV 9303 => 4
[14-03-0119 23:40:33] - CBDAExt::CBDAExt(...): AVERTV 9303 => 5
[14-03-0119 23:40:33] - CBDAExt::CBDAExt(...): AVERTV 9303 => 6
[14-03-0119 23:40:33] - CBDAExt::CBDAExt(...): AVER => Positivo Supported
[14-03-0119 23:40:33] - BdaExt_CreateInstanceParams(...): 000000001DCD1E00
[14-03-0119 23:40:33] - BdaExt_CreateInstanceParams(...): GOOD
[14-03-0119 23:40:42] - BdaExt_GetOfflineInfo(...): CALLED
[14-03-0119 23:40:42] - BdaExt_GetOfflineInfo(...): CALLED

Re: avermedia td310 и PLP не находит все каналы

Posted: Thu Mar 14, 2019 9:20 pm
by crazycat
crackname wrote:
Thu Mar 14, 2019 4:56 pm
If you can test the attached eBDA module; it should now support scanning for new PLP, and have a faster channel switch.
maybe easy send sources to Prog or to me :) and name list ITE 930x based devices for detection (TV Butler, this Avermedia and etc).

Re: avermedia td310 и PLP не находит все каналы

Posted: Thu Mar 14, 2019 9:23 pm
by crackname
Hello,

The log doesn't contain any Before/After transponder lock, it's like no scan was made.

Please try the new attached file, this one use the Blindscan interface that avermedia use in there software, if it doesn't, I don't know what will !

Re: avermedia td310 и PLP не находит все каналы

Posted: Thu Mar 14, 2019 9:24 pm
by crackname
crazycat wrote:
Thu Mar 14, 2019 9:20 pm
crackname wrote:
Thu Mar 14, 2019 4:56 pm
If you can test the attached eBDA module; it should now support scanning for new PLP, and have a faster channel switch.
maybe easy send sources to Prog or to me :) and name list ITE 930x based devices for detection (TV Butler, this Avermedia and etc).
maybe I'll do that, I'll probably send the source to Prog, and he should modify it as he see fit.

Just sent the sourcecode to Prog, now it's up to him.

Good Luck

Re: avermedia td310 и PLP не находит все каналы

Posted: Sun Mar 17, 2019 12:22 am
by NSGrid
crackname wrote:
Thu Mar 14, 2019 9:23 pm
Hello,

The log doesn't contain any Before/After transponder lock, it's like no scan was made.

Please try the new attached file, this one use the Blindscan interface that avermedia use in there software, if it doesn't, I don't know what will !
Alas, but unfortunately, the tuner stubbornly does not see DVB-C channels when searching in ProgDVB. Moreover, I tried to even explicitly specify the channel frequency, which I determined from the channel search settings of the official Avermedia software. Here are some screenshots for example and logs.