progdvb.com

Собственно пытаюсь принимать цифровое эфирное ТВ.

Win 10 x64 / ProgDVB 7.21.01

Как я понял, прога ловит только PLP 0, остальные PLP не воспринимает.
В интерфейсе ручного поиска каналов в версии ProgDVB 7.21.01 нет опции выбора PLP.

Что сделать, чтоб стало ловить каналы со всеми PLP?

Лог прилагаю.

Hello @evgenc

Can you try the attached module (backup the original one), then report if it work.

Уважаемый crackname, надеюсь, ты понимаешь по-русски...
Если я правильно понял, то нужно было в папке модулей заменить исходный файл графа твоим файлом графа.

Заменил. Перевыбрал источник сигнала по новой. Выполнил поиск еще и еще раз, и авто- и в ручном режиме. По прежнему указанные каналы не нашлись...

Да, прошу прощения, дело происходит на Win 7, а не на Win 10, как я писал ранее.
Надеюсь, к проблеме это отношения не имеет...

Hello evgenc,

It's ok, I will use a translator, and I'll try to help as much as I can.

The module is not loaded at all, it should generate "BDA_AverMedia.txt" in logs directory, but it's not in the attached "log.rar".

You should copy the file in the folder "x32" because you are using the 32bits version of ProgDVB, and try again, if that's not the case, I could re-upload a modified version of the module again.

OK, crackname, it will be more convinient for you to communicate in English...

Yes, my fault, I used the file from your x64 folder, not x32...

Will make deep tests tomorrow...

evgenc wrote: ↑

Sun Jun 30, 2019 6:07 pm

OK, crackname, it will be more convinient for you to communicate in English...

Yes, my fault, I used the file from your x64 folder, not x32...

Will make deep tests tomorrow...

Ok, good luck

crackname,

1) I have test your graph from June 29 - as result PLP1/2 not found,
2) Then I test your graph from June 30 - as result the firts start of ProgDVB with this garph have lead to error message. But at the following starts - the manual scanning interface have PLP Multistream option, and it can find PLP 1 and PLP 2 channels! It is great, thank you!

But I cannot understand, how to add this two cahnnels to my main channel list.
Seems my manual scanning interface have no OK and Cancel buttons, I do not know why...

Can you check, is it by reason of your modified graph or by reason of ProgDVB bug?

А при обычном сканировании? А если список каналов удалить предварительно? Можно прям файлы в channel при закрытом progdvb.

Hello evgenc,

1) Figured it could probably not work, that's why I posted the June 30 one.
2) Glad it work. I can't decide if an error occurred in the module or ProgDVB without checking the Log files.

You can add channels from manual scan, by scanning for available PLPs and select each PLP and do a lock/scan with it.

I have unistall and then install ProgDVB again. After installing I have put new graph to module folder.
Auto scanning is not find channels with PLP>0.
Manul scanning allow to find channels with PLP>0, but its interface have no OK/Cancel buttons, see attached picture. I also tried to click the Fix button, but no result...

Also it is attached the whole folder from C:\ProgramData\ProgDVB.

So, guys please help me to fix these bugs.

Sorry guys, I find the problem of missed OK/Cancel button: In my PC I used 125% font size, as attached.

If switch to 100% then OK/Cancel buttons will back to interface!

And I finnaly success to add PLP1 and PLP2 channels to my channel list!

Special Thanks to crackname!!!


____
I hope the Prog developer will add modified Aver graph to instllation package and also will take into account the problem of PC system font size...

Но нормальный поиск не работает? Можно мне логи обычного поиска

Hello evgenc,

Glad you sorted the problem.

I forwarded the module to @Prog, he will probably release a new version soon.

Good luck

Prog wrote: ↑

Mon Jul 01, 2019 7:24 pm

Но нормальный поиск не работает? Можно мне логи обычного поиска

Нормальный, он же автоматический, не находит все возможные каналы...
Лог был прикреплен в моем последнем сообщении с RAR архивом. В нем нет необходимой инфы?

evgenc,

Can you try the attached module, Just to test if we should set PLP before or after setting the Frequency/Transponder in hope to fix PLP on normal scan