Page 1 of 3

Scanning issue

Posted: Thu Jul 01, 2010 2:48 pm
by forsaken
Hi. I have some scanning problems. I made *.m3u list containing all channels and set progdvb to read from it, but it simply nothing happens. Scanning process runs trough all channles included in the list but it adds nothing. Here is a screenshot of what i'm talking about.
I tried to made the list by simply putting all http://*.*.*.*:**** adresses inside, try to made it with udp://@;*.*.*.*:* but in both cases the result is the same Also made a blind search - same thing! Any ideas?

Re: Scanning issue

Posted: Thu Jul 01, 2010 2:52 pm
by Prog
Can you record me sample of this stream?

Re: Scanning issue

Posted: Thu Jul 01, 2010 3:04 pm
by forsaken
As soon as I make things work I will. By now I can only watch the empty scanning window :(
Do you have any idea how to make it work?

Re: Scanning issue

Posted: Thu Jul 01, 2010 3:11 pm
by Prog
Try scan transponder dialog.

Re: Scanning issue

Posted: Thu Jul 01, 2010 3:27 pm
by forsaken
I did - same s*it :( When I choose transponder and hit lock the level bar goes to 100% and quality bar goes to 100% too but only for a sec. then it goes back to 0 (if anyone know why....please tell me!). Pressing scan button gives no result.

Re: Scanning issue

Posted: Thu Jul 01, 2010 3:56 pm
by Prog
Are you sure in UDP params? What information give your provider?

Re: Scanning issue

Posted: Thu Jul 01, 2010 4:31 pm
by forsaken
Yes, I'm sure. If use VLC it rus without problem. But when it comes to ProgDVB...boom! Something's wrong!
The only thing I have to do is to run the player trough proxy server but I set this up in ProgDVB. I really don't know what is wrong. I set the correct proxy address, made m3u list by myself with 100% correct IPs and ports....

Re: Scanning issue

Posted: Thu Jul 01, 2010 7:47 pm
by Prog
Do you have traffic in Settings->Device options? May be network settings not correct in this dialog.

Re: Scanning issue

Posted: Fri Jul 02, 2010 7:21 am
by forsaken
Traffic - 727, Speed - 0.
Btw traffic is always 727, no matter how many times or how many channells I try to scan.

Re: Scanning issue

Posted: Fri Jul 02, 2010 7:39 am
by Prog
Try change network adapter in this dialog.

Re: Scanning issue

Posted: Fri Jul 02, 2010 9:24 am
by forsaken
Nope. Still nothing :(

Re: Scanning issue

Posted: Fri Jul 02, 2010 12:23 pm
by Akad
Looks like problem on proxy. Can you try direct link, w/o any proxy?
What kind proxy do you have? HTTP/SOCKS... And is it need authorization?

Re: Scanning issue

Posted: Fri Jul 02, 2010 2:13 pm
by forsaken
It is HTTP proxy and does not require authorization. And yes, I did try direct links without proxy but still nothing. I also did try numerous different settings in the ProgDVB itself and in my router - turned off all restrictions, port forwarding, turned off firewall....and so on, and so on......nothing helps! :(

Re: Scanning issue Swisscom IPTV streams

Posted: Sat Apr 26, 2014 10:56 am
by redge
hello, is it possible to accelerate Blind Search on IPTV Client ?
From: 239.186.64.0 Port 10000 ... 10000
To: 239.186.68.255

Switzerland, Swisscom IPTV


time spend: +4h40 for scan the above range successfully, just loose a lot of time ;-)
Is it normal slowness scanning for IPTV Client ?
or i simply missing some steps ?

medium: time search 1h10 for 255 ip address of 1 full range
no proxy on ProgDVB

version used: ProgDVB v7.04.3

Thank you for your help

Re: Scanning issue

Posted: Sat Apr 26, 2014 12:29 pm
by Prog
Many combinations request some time... check scanner settings. Addition delay must be 0.