Page 2 of 3

Re: Scanning issue

Posted: Mon May 12, 2014 11:40 pm
by redge
I have only single source is IPTV Client (I won't have official list)
so i use Blind Search for find channels list :-)

[BlindSearch]
FromMulticast=233.35.254.1
ToMulticast=233.35.254.254
FromPort=1234
ToPort=1234

scan only success with factory port 5000 to 5000 but have no channel at all.

if i change port range: 1234 to 1234 or 10000 to 10000 on version 7.0.5 , it simply crash.
back to 7.0.3 OK

ProgDVB crash 7.05 on scan, unusable for IPTV client (i won't use any hardware card or USB DVB-C/T)

i did apply log file but how do i send a log file to staff of ProgDVB ?
so is easy to debug for staff ?

Thank you for your help.

Re: Scanning issue

Posted: Tue May 13, 2014 4:42 am
by Prog
Please enable logs in Settings->Options->Debug and send me all files from Logs directory after crash.

Re: Scanning issue

Posted: Sun Jun 29, 2014 10:12 am
by redge
ProgDVB 7.0.5.6 and 7.0.5.7 are both freeze after blind scanned 37 channel on IPTV client! regression bug
ProgDVB 7.0.5.5 back to 7.0.5.5 success can scall all range 239186.68.1 to 239.186.255 port 10000 under same condition but no video at all !
back to 7.0.4.2 rtp mode=auto work well just slow blind scan :-)

- no DVB card
- 6.1.76001 32bit english
- cpu: Intel Core2 T7400@2.16GHz
- codec, graph, renderer = no change, factory
- all kind of error messages, including cause, if mentioned: no channel, just freeze
- did a cold reboot help = no

Re: Scanning issue

Posted: Mon Jun 30, 2014 7:25 am
by Prog
Do you really have RTP? Please send me logs from "bad" version of ProgDVB.

Re: Scanning issue

Posted: Mon Jul 14, 2014 7:25 pm
by redge
v7.06.0 improved blind scan time.
win 15" over all previous releases, great improvement, thank you a lot.
before 1h10 min
now 0h55 min.
dont' stop here, please continue accelerate with Intel IPP
IntelĀ® Integrated Performance Primitives
https://software.intel.com/en-us/intel-ipp/

Re: Scanning issue

Posted: Fri Aug 29, 2014 5:00 pm
by redge
win7 home premium sp1 32bit
v7.06.5 improved blind scan time it take 20min at time a have deleted file was fantastic result:
the wrong side effect, i was unable to see any video, only audio worked.

now blind scan take 1h10 for range ip 239.186.64.0 to 239.186.64.255 but i have both video/audio.

v7.06.6 i'm unable to do the same.
if you can solve the time scan between file and no file ?
i have only IPTV client without url list channel reference. (our provider won't want to give us the url)

blind scan time count is wrong from the 1st release i had tested until now.
is correct if less than 1h00 for scanning.

i'm not sure i'm clear, maybe you understand, i hope.

Re: Scanning issue

Posted: Fri Aug 29, 2014 5:57 pm
by Prog
Please send me logs "without audio and video"

Re: Scanning issue

Posted: Thu Nov 06, 2014 8:28 pm
by redge
Is there exist any universal service discovery can found service from operator IPTV like digital tv cable DVB-C does auto found service available and show/store all channel in less than 10min instead a full blind scan token env. 55min discover all channels where result is not accurate and not friendly autoclassified by operator numbering does.
Result too many channel scrambled without channel name and unable to find name and few open tv channel i can rename manually but is hassle free time consuming.
thank for improve Channel blind search

win7 home sp1 english
ProgDVB 7.0.7.03 Network edition
IPTV client
scanned range using RTP: auto port: 10000

239.186.64.1 - 239.186.64.254 17min
239.186.66.1 - 239.186.66.254 19min
239.186.68.1 - 239.186.68.254 17min

Re: Scanning issue

Posted: Fri Nov 07, 2014 6:31 am
by Prog
Some operators support SAP. You can try it in VLC (current ProgDVB not support that)

Re: Scanning issue

Posted: Sat Dec 13, 2014 9:35 pm
by redge
thank you for your support, our operator won't support SAP (did not discover anything) or is not standard SAP from VLC !

win7 home premium sp1 english
7.07.5 pro updated to 7.0.7.6 pro is unable to watch any channel iptv and nor blind scan (found no channel)
totally unusable for IPTV.
please test without debugger or review your codes

back to 7.07.5 pro overwrite the "new" build i can play everything above OK

Re: Scanning issue

Posted: Mon Dec 15, 2014 10:15 pm
by redge
7.07.7 IPTV back available. thank you
Could you improve scan and add difference discovery report to text and as well channel removed/added/switched/changed name ?

Thank you for better usage of ProgDVB scanning :-)

Re: Scanning issue

Posted: Tue Dec 16, 2014 7:08 am
by Prog
ProgDVB do some report after scan. But without text report...

Re: Scanning issue

Posted: Sat Dec 20, 2014 5:02 pm
by redge
7.07.7 IPTV back available... partially

blind scan OK
but watching is almost impossible after switch some channels
error
so i stick with v7.0.7.5 and really usable with IPTV

Re: Scanning issue

Posted: Sat Dec 20, 2014 6:25 pm
by Prog
Please send me logs.

Re: Scanning issue

Posted: Mon Dec 22, 2014 11:25 pm
by redge
Try watch channel after a successful blind scan IPTV and look properties of every channel
your code mixing IPTV url and another fonction
[Mhz mis/plp=0] unrelated to channel url properties and should go away.

Scanning [IPTV client]

URL:
udp://@239.186.68.242:100Mhz mis/plp=0 <<--- actual bad from v7.07.07b
udp://@239.186.68.242:10000 <<-- good after manual update
udp://239.186.68.242:10000 <<-- good after manual update

win7 home sp1 english
ProgDVB 7.0.7.07b Pro
IPTV client only (all others are unselected at install.
scanned range using RTP: auto port: 10000