Re: Skystar USB HD and remote control
#4I guess there is no support here. Why this forum exist at all?
Re: Skystar USB HD and remote control
#5First of all, this board exists, to allow people helping each other.
This is not a 24/7 service helpdesk.
Does your remote work with the original application, that came with your hardware?
Did you try relevant device settings in ProgDVB?
In the end, I don't have that tuner. So I can't really help. Anyone else to continue, perhaps?
This is not a 24/7 service helpdesk.
Does your remote work with the original application, that came with your hardware?
Did you try relevant device settings in ProgDVB?
In the end, I don't have that tuner. So I can't really help. Anyone else to continue, perhaps?
My signature:
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Re: Skystar USB HD and remote control
#6Thanks for your reply. I've tried with the original application on my cd (DvbViewer TE) and its working perfectly.
On interface menu(ProgDvb) there are two control modules Universal HID remote control and Winlirc client. I've tried every combination in options menu from Universal HID remote control but its not working.
@Juergen are you using remote control and if you are on what device, it might help?
On interface menu(ProgDvb) there are two control modules Universal HID remote control and Winlirc client. I've tried every combination in options menu from Universal HID remote control but its not working.
@Juergen are you using remote control and if you are on what device, it might help?
Re: Skystar USB HD and remote control
#7Yes I am.
But right now only for the Nexus, and this is a proprietary solution, not to be compared to anything else. So no, it will not help.
- fin -
But right now only for the Nexus, and this is a proprietary solution, not to be compared to anything else. So no, it will not help.
- fin -
Re: Skystar USB HD and remote control
#9Its a small remote control that comes with Skystar USB HD. I can not find any picture of it , but I can take a picture tomorrow if it helps.
Re: Skystar USB HD and remote control
#11I can not understand. Is it plugin and if it is how can i put in ProgDvb?
Re: Skystar USB HD and remote control
#12hi everyone, is anyone found how to use remote control from skystar usb hd in progdvb ?
Re: Skystar USB HD and remote control
#13Hi, looking for long hours, I've found nothing, and I hope now that you can help me further.
Namely the following:
I have a Technisat SkyStar USB HD, everything goes perfectly, I get not only the remote control to work.
The TV card has a built-in infrared receiver but he will not see me in ProgDVB.
Have no idea what to do yet to get the remote control to run.
Hopefully someone knows what I can do even
Speed
Namely the following:
I have a Technisat SkyStar USB HD, everything goes perfectly, I get not only the remote control to work.
The TV card has a built-in infrared receiver but he will not see me in ProgDVB.
Have no idea what to do yet to get the remote control to run.
Hopefully someone knows what I can do even
Speed
Re: Skystar USB HD and remote control
#14Lots of report about this problem. But I am not have information about API of RC for this device
Re: Skystar USB HD and remote control
#15Hi all. I also bought this product http://www.technisat.com/en_XX/SkyStar- ... 563456759/
Includes a remote FBPC100A/01. Went through all the options in ProgDVB, but could not get it to work. At this point the remote only works DvbViewer TE. And it is activated in the settings option. Remote receiver is part of the device.
What else can try to start using the remote control in ProgDVB?
Includes a remote FBPC100A/01. Went through all the options in ProgDVB, but could not get it to work. At this point the remote only works DvbViewer TE. And it is activated in the settings option. Remote receiver is part of the device.
What else can try to start using the remote control in ProgDVB?