Re: bug feedback - post newly found progdvb bugs here
#647hi
ok as i mentioned most of the times i use remout control to change channels.
and for that cause i copied all my favorite channels from diferent sattelites channel trees to one , so it will be easy to change channels.
for example i copied my favorite music sport movie channels manualy from Hotbird ,Eutelsat W3A ,Astra ,Eurobird9 ..etc
to one channel list that i made manualy and named it my favorite .it is like making a favorit channel list if you now what i mean .
now i try to change from one channel to another in my favorite channel list.
for example from deejay tv ( Which i copied from Hotbird Channel.tree ) to Eurosport ( Which i copied from Eutelsat W3A ) in to my favorite channel list.
now the Bug that appeard after 6.51.7 versions is:
prog dvb does not stay in my favorite channel list. and goes to sattelite tree that is related to chosed channel .
from deejay tv ( Hotbird 13E.tree ) to Eurosport ( Eutelsat W3A.tree ) . it goes from Hotbird 13E.tree to Eutelsat W3A.tree . and now i have to go back to my favorite channel list manualy by useing mouse .
hope i made it clear enough.
and sorry for my english.
for more detail i sent you a video .
please check your pm
thx.
ok as i mentioned most of the times i use remout control to change channels.
and for that cause i copied all my favorite channels from diferent sattelites channel trees to one , so it will be easy to change channels.
for example i copied my favorite music sport movie channels manualy from Hotbird ,Eutelsat W3A ,Astra ,Eurobird9 ..etc
to one channel list that i made manualy and named it my favorite .it is like making a favorit channel list if you now what i mean .
now i try to change from one channel to another in my favorite channel list.
for example from deejay tv ( Which i copied from Hotbird Channel.tree ) to Eurosport ( Which i copied from Eutelsat W3A ) in to my favorite channel list.
now the Bug that appeard after 6.51.7 versions is:
prog dvb does not stay in my favorite channel list. and goes to sattelite tree that is related to chosed channel .
from deejay tv ( Hotbird 13E.tree ) to Eurosport ( Eutelsat W3A.tree ) . it goes from Hotbird 13E.tree to Eutelsat W3A.tree . and now i have to go back to my favorite channel list manualy by useing mouse .
hope i made it clear enough.
and sorry for my english.
for more detail i sent you a video .
please check your pm
thx.
Re: bug feedback - post newly found progdvb bugs here
#648A reproduceable bug within EPG / Scheduler. A wrong date is applied, when programming the scheduler via. EPG:
Open EPG.
Choose a TV show, starting on some date early after midnight (like 00:15).
Click on the button to add the recording.
Modify the time from 00:15 to something late (like 20:15) and apply.
Go to Scheduler and check your scheduled recording.
It will have a wrong date. It will be 1 day before the recording you wanted.
This effect has existed for several 6.xx versions now.
Open EPG.
Choose a TV show, starting on some date early after midnight (like 00:15).
Click on the button to add the recording.
Modify the time from 00:15 to something late (like 20:15) and apply.
Go to Scheduler and check your scheduled recording.
It will have a wrong date. It will be 1 day before the recording you wanted.
This effect has existed for several 6.xx versions now.
Re: bug feedback - post newly found progdvb bugs here
#649Please send screen of filled dialog for record, before your click on OK button.
Re: bug feedback - post newly found progdvb bugs here
#650Here is the Record-Dialog and the Scheduler, opened directly after the Record-Dialog has been closed with OK.
no Diseqc with Twinhan clone in 6.60.4
#651Hi,
I just tried 6.60.4 version. I was using 6.40.4. I have the two versions in different directories.
I have Twinhan clone (Skystar 1-CI) DVB-S PCI. It is BT878 with CI slot. I use the 1.2.3.8 WHQL DVB-TV BDA drivers from the DigTV install in Win XP SP3 + .NET 3.5
I have 4 dishes connected to a single 4-port disecq switch.
In 6.60.4, I can't get any signal from anything other than the first dish - so it looks like Disecq isn't working. I use the same settings as before.
version 6.40.4 can see all 4 dishes OK.
what's the difference ? how do I get disecq working in 6.60.4 ?
best,
I just tried 6.60.4 version. I was using 6.40.4. I have the two versions in different directories.
I have Twinhan clone (Skystar 1-CI) DVB-S PCI. It is BT878 with CI slot. I use the 1.2.3.8 WHQL DVB-TV BDA drivers from the DigTV install in Win XP SP3 + .NET 3.5
I have 4 dishes connected to a single 4-port disecq switch.
In 6.60.4, I can't get any signal from anything other than the first dish - so it looks like Disecq isn't working. I use the same settings as before.
version 6.40.4 can see all 4 dishes OK.
what's the difference ? how do I get disecq working in 6.60.4 ?
best,
Re: bug feedback - post newly found progdvb bugs here
#652Check Settings->Device options in both version.
Re: bug feedback - post newly found progdvb bugs here
#653In 6.40.4
Azurewave/Twinhan
2
200ms
In 6.60.4
Azurewave/Twinhan, Technisat
2
200ms
on
on
on
I don't understand these 3 new settings, but turning off 'Use demultiplexor and TIF' prevents even Dish 1 from seeing anything, and ITunerRequest doesn't seem to do anything different if I turn it off.
Best,
Azurewave/Twinhan
2
200ms
In 6.60.4
Azurewave/Twinhan, Technisat
2
200ms
on
on
on
I don't understand these 3 new settings, but turning off 'Use demultiplexor and TIF' prevents even Dish 1 from seeing anything, and ITunerRequest doesn't seem to do anything different if I turn it off.
Best,
Re: bug feedback - post newly found progdvb bugs here
#654Hm. What last good version? Same version is x32?
Re: bug feedback - post newly found progdvb bugs here
#655Last non-6.6x version I have is 6.43.2 - which is OK. I have no 6.5x installers to try and I can only see 6.6x versions on your web site. I'll try 6.60.2 next...
My Sat PC CPU is P4HT-550 - not x86_64 capable, so everything is x32.
My XP root certs verify your UTN/Comodo cert, so it isn't a bad signature issue AFAICS.
My Sat PC CPU is P4HT-550 - not x86_64 capable, so everything is x32.
My XP root certs verify your UTN/Comodo cert, so it isn't a bad signature issue AFAICS.
Re: bug feedback - post newly found progdvb bugs here
#656OK - I have tried 6.60.2 and 6.60.5 now
It can see Disecq 1.0 Ports A and C, but not B & D.
It can tune to the channels that come installed on A & C and it can scan for new channels on A & C. The other ports do not produce a signal at all.
???
[more info - in all my tests, I have 'use 1 CPU' and 'disable CAM' set and time shift disabled]
It can see Disecq 1.0 Ports A and C, but not B & D.
It can tune to the channels that come installed on A & C and it can scan for new channels on A & C. The other ports do not produce a signal at all.
???
[more info - in all my tests, I have 'use 1 CPU' and 'disable CAM' set and time shift disabled]
Re: bug feedback - post newly found progdvb bugs here
#657Please try change repeats count or delay values.
Re: bug feedback - post newly found progdvb bugs here
#658OK.
I tried 1,2,3 repeats and 100, 200, 300, 500 ms
I also tried 'start only 1 device'.
Still the same - only Diseqc A(1) and C(3) get a signal.
I tried 1,2,3 repeats and 100, 200, 300, 500 ms
I also tried 'start only 1 device'.
Still the same - only Diseqc A(1) and C(3) get a signal.
Most Popular Channels
#659I use 'Most Popular Channels List' a lot, but everytime i click a channel other than the one at top of the list something weird happen. All channels shifts down leaving a white useless space...
I'm running ProgDVB x64 v6.60.05 on Windows 7 x64 SP1.
Any fix for this?
Thank you all ...
I'm running ProgDVB x64 v6.60.05 on Windows 7 x64 SP1.
Any fix for this?
Thank you all ...