I have tried with 6.05.02 and latest, everything looks fine, no error, but the dish is not moving at all. (Optibox DM3800)
On BDA compatibility should it be lifeview or other?
This is ok?
USALS should be on?
Cheers,
Marin
Re: Lifeview NotonlyTV LV83ATS & positioner
#2Afaik lifeview not support positioner. Only switch. But try select Microsoft mode in Settings->Device options
Re: Lifeview NotonlyTV LV83ATS & positioner
#31.1 only, confirmed by lifeview support. btw. is it code or hardware 1.1 > 1.2?
If code, can other drivers correct this ?
Cheers,
Marin
If code, can other drivers correct this ?
Cheers,
Marin
Re: Lifeview NotonlyTV LV83ATS & positioner
#4Drivers can only be made or changed by manufacturers.
DiSEqC 1.1 and 1.2 or USALS are all followers of 1.0, not of each other. Full technical specifications of DiSEqC can be obtained for free from Eutelsat.
But this does not help here, as in fact we don't know, if it's (driver) code or firmware code or perhaps plain hardware limitation in your case.
AFAIK lifeview dont provide a SDK for your tuner, that could possibly give Prog a hint.
So, as Prog told, try Microsoft mode in Settings->Device options. Else forget about it...
DiSEqC 1.1 and 1.2 or USALS are all followers of 1.0, not of each other. Full technical specifications of DiSEqC can be obtained for free from Eutelsat.
But this does not help here, as in fact we don't know, if it's (driver) code or firmware code or perhaps plain hardware limitation in your case.
AFAIK lifeview dont provide a SDK for your tuner, that could possibly give Prog a hint.
So, as Prog told, try Microsoft mode in Settings->Device options. Else forget about it...
My signature:
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Re: Lifeview NotonlyTV LV83ATS & positioner
#5Gave up on this Mega HD card that has no support for positioner nor it is DVB-S2 capable. A HD card
Don't forget: Lifeview Notonlytv LV83ATS and twin called AverMedia AVerTV Satellite Trinity.
Got SkyStar HD 2, everything works from start, not really important but channel change speed is amazing.
Thank you,
Marin
Don't forget: Lifeview Notonlytv LV83ATS and twin called AverMedia AVerTV Satellite Trinity.
Got SkyStar HD 2, everything works from start, not really important but channel change speed is amazing.
Thank you,
Marin