Ok. Found out what really happened (and yes, it is 32bit):
I use C:\DVB\ProgDVB for installation. Usually the update installs by default in the same location, so i don't check the path
This one installed default in C:\Program Files\ProgDVB and i didn't noticed. Since the shortcut was updated, it worked, but it was in another folder and thus without registration key, disecq setup and all the other things.
Reinstalled again over the old path and everything is working ok.

So the only issue is: Update does not default to the existing ProgDVB folder...

i have some problems with latest versions, some errors appear when i close progdvb.
http://imageshack.us/f/403/error2g.jpg/
http://imageshack.us/f/444/error1y.jpg/

Second, some errors appear when i use mosaic:
http://imageshack.us/f/834/error3s.jpg/

Third, pip not working, on pip panel i see only 1 channel.
Example, i watch channel A, i click on PIP, i see only channel A .
I could never use PIP in progdvb, in any version.
http://imageshack.us/f/88/error4t.jpg/



Four, in quality signal at "Q" i have signal loss. Sometimes is say 100%, but 1-3% are lost.
At "L" i have 100%.
Sometimes is say 70%, when image freeze.
http://imageshack.us/f/442/error5.jpg/

What does mean? It mean i have bad signal?

Attach is my logs.
I have 2 logs, first is when osd errors appear, second log it's from signal dropped to 70% and my recording was trashed.

here is an rec when signal dropped to 70%:
http://refile.net/f/?cuN
mirror: https://rapidshare.com/files/3865954732 ... 3.09.51.ts

reeven wrote:i have some problems with latest versions, some errors appear when i close progdvb.
http://imageshack.us/f/403/error2g.jpg/
http://imageshack.us/f/444/error1y.jpg/

Second, some errors appear when i use mosaic:
http://imageshack.us/f/834/error3s.jpg/

Third, pip not working, on pip panel i see only 1 channel.
Example, i watch channel A, i click on PIP, i see only channel A .
I could never use PIP in progdvb, in any version.
http://imageshack.us/f/88/error4t.jpg/



Four, in quality signal at "Q" i have signal loss. Sometimes is say 100%, but 1-3% are lost.
At "L" i have 100%.
Sometimes is say 70%, when image freeze.
http://imageshack.us/f/442/error5.jpg/

What does mean? It mean i have bad signal?

Attach is my logs.
I have 2 logs, first is when osd errors appear, second log it's from signal dropped to 70% and my recording was trashed.

here is an rec when signal dropped to 70%:
http://refile.net/f/?cuN
mirror: https://rapidshare.com/files/3865954732 ... 3.09.51.ts

same problem on mosaic....

i notice some problems, when i startup up progdvb for the first time in a day, progdvb freeze, image continue to run, sound as well, but round circle from mouse appear on progdvb image, and i am force to close progdvb.
in log i see this:

Pls use spoiler or zip

this bug:

i notice some problems, when i startup up progdvb for the first time in a day, progdvb freeze, image continue to run, sound as well, but circle from mouse appear on progdvb image, and i am force to close progdvb.

still present in latest 6.73.04
pip still not working
mozaic as well.

Try select EVR (not custom EVR)

just try normal EVR, prog mux, prog ar sound, this is the result:

http://img405.imageshack.us/img405/7508 ... rogdvb.jpg

What DVB device? It is looks like bad traffic.

i have a few, one of it is terratec htc xs hd, empia 2885 chipset.
That broken image i see only on evr ( not custom).

yesterday was the first day when i use progdvb Client on laptop.
On an dual core amd 2ghz, i have 70-100% processor usage on laptop when watching live-tv on client pc.( on HD channels), i use also high performance energy mod.

With this laptop also, using dvbviewer client, i have 2-15% processor usage on SD or HD channels.
When using DVBLink + mediacenter on laptop( stream over network) i have 2-15% processor usage on sd or hd.

Also, on client, i see :

1.signal is 60-80%, but on server is 100%. ( i use wireless 54mbs)
2. if i zapp on 3 channels, i have 3 fddshow audio icons in taskbar, if i zapp on 100 channels, i have 100 fddshow audio icons in taskbar.

And, if i close video window on progdvb server, live-tv stop working on client.
I must leave open progdvb with image on server,

At first try select same codec and video renderer like DVBViewer

Find the fix for 100% processor usage on progdvb client.
Dxva was OFF in cyberlink.

But, i have a lot of problems regarding crashes, freezes with progdvb on server and also on client.
Progdvb is not stable, it's not even 2% stable from 100%.

With new 6.74 no sorting cahnnels by transponder frequency and no scan by transponder...

With Aver3D Quadro HD(dvb-s/c/t)

What last good version? Same problem in manual scan mode?