PINNACLE PCTV SAT PRO USB
#1I HAVE A PINNACLE PCTV SAT PRO USB AND WHEN I RUN THE PROGRAM I CAN NOT CHOOSE AN APPROPIATE DEVICE IN THE DEVICE LIST , WHAT CAN I DO?. WHAT IS THE PROBLEM?? I HAVE NO IDEA. THANKS
#2
as you can read many times here on this board....
for every card that is running on bda driver you have to choose a bda device...
for every card that is running on bda driver you have to choose a bda device...
#3
I HAVE TRIED WITH BDA DEVICES BUT I CAN NOT MAKE THAT RUN, IT IS POSSIBLE ANOTHER SOLUTION? THANKS
#5
@ FRAN
PLEASE release your caps lock.
We're not half blind over here, and all in caps means a lot harder to read.
If there's just BDA driver available for your hardware, you have to (find and) choose a BDA device, no other way...
In such a case, first install and completely set up the original software, that came with it. After that try to use ProgDVB with a suitable BDA device.
If there's just a WDM driver, you need to select a suitable device file, if available.
PLEASE release your caps lock.
We're not half blind over here, and all in caps means a lot harder to read.
If there's just BDA driver available for your hardware, you have to (find and) choose a BDA device, no other way...
In such a case, first install and completely set up the original software, that came with it. After that try to use ProgDVB with a suitable BDA device.
If there's just a WDM driver, you need to select a suitable device file, if available.
My signature:
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
#6
Hello,
does this solution also refer to the
PCTV Sat HDTV Pro USB?
I chose the only Pinnacle Divice in the list and this does not work.
does this solution also refer to the
PCTV Sat HDTV Pro USB?
I chose the only Pinnacle Divice in the list and this does not work.
#7
SiLencer wrote:as you can read many times here on this board....
for every card that is running on bda driver you have to choose a bda device...