Hallo,
my new TBS 5925 doesn't find an channels (testet with different Software).
I use two different Laptops (win_XP and Win_8)
With "prog finder" i can see quality and signal power on the laptop-screen,
but on the upper right side it was shown "Signal blocked" (in german "Signal: gesperrt").
I think this "Signal blocked" is the Problem, but how can i solve this?
Did everybody knows what the reason for "Signal blocked" is?
grettings from Germany
(sorry for my poor english)
Re: TBS 5925 doesn't find any channels
#2Try switch Settings->Device options->Mode to Microsoft.
ps: Any diseqc devices?
ps: Any diseqc devices?
Re: TBS 5925 doesn't find any channels
#3Thank you for your reply.
I tried Settings-> Device Options >{BDA} TBS5925 TVBS2 Tuner< -> properties >Microsoft compliant BDA Driver
ps: Any diseqc devices?
There is no switch/device between LNB and DVB-Tuner.
Signal was also blocked.
Any ideas?
I tried Settings-> Device Options >{BDA} TBS5925 TVBS2 Tuner< -> properties >Microsoft compliant BDA Driver
ps: Any diseqc devices?
There is no switch/device between LNB and DVB-Tuner.
Signal was also blocked.
Any ideas?
Re: TBS 5925 doesn't find any channels
#4I have exactly the same problem. found solution;
But when I installed the DVB Dream then played fine.
Any Help?
But when I installed the DVB Dream then played fine.
Any Help?
- Attachments
-
Re: TBS 5925 doesn't find any channels
#6Yes I have diseqc maximum 4:1 as attached in the photo.
Signals are received only by the port 1.
If you use another DVB program then works just fine.
I tried it with the progdvb 32bit & 64bit.
if you want I can give you remote access to teamviewer
Win 7 SP1 64Bit, Full UpDate, TBS5925 DVB-S2 TV Tuner USB last drives v2.0.0.4
Signals are received only by the port 1.
If you use another DVB program then works just fine.
I tried it with the progdvb 32bit & 64bit.
if you want I can give you remote access to teamviewer
Win 7 SP1 64Bit, Full UpDate, TBS5925 DVB-S2 TV Tuner USB last drives v2.0.0.4
- Attachments
-
