Re: SAT>IP Protocol support

#332
Hi,

Is ProgDVB supposed to work with a linux receiver that offers support for streaming?

I have tried with VLC and it works very well on all channels but ProgDVB only works on some of them. For the ones where is not working (most of them) it remains with status preparing but no audio or video is displayed. The logs are attached.

There is any known workaround for this problem?
| WinXP SP3 or Win10 1709 | i5 660@3.33Ghz | 4 Gb RAM | ATI Radeon HD 5450 1Gb|
| TT S2-3200 | TT 1501| Astrometa| TT Infrared Receiver| Octagon SF4008 for streaming to ProgDVB|
| Prog demux |
| VMR7 | CyberlinK video decoder (MPEG2) and FFDShow for H264 - DXVA enabled |
| ProgAR | FFDShow audio | Audio processor enabled |
| Timeshift in RAM | Buffer size 2000 |
Attachments
logs.zip
(32.22 KiB) Downloaded 156 times

Re: SAT>IP Protocol support

#335
Hi Prog,

Any hints regarding my question above?
| WinXP SP3 or Win10 1709 | i5 660@3.33Ghz | 4 Gb RAM | ATI Radeon HD 5450 1Gb|
| TT S2-3200 | TT 1501| Astrometa| TT Infrared Receiver| Octagon SF4008 for streaming to ProgDVB|
| Prog demux |
| VMR7 | CyberlinK video decoder (MPEG2) and FFDShow for H264 - DXVA enabled |
| ProgAR | FFDShow audio | Audio processor enabled |
| Timeshift in RAM | Buffer size 2000 |

Re: SAT>IP Protocol support

#336
I would say that for some reason the PID's are not correctly set on the channels where is not working. Please check the screens shots.

1. Working - a channel that works very well using IP.
2. Not working - another channel that doesn't work also when using the receiving by IP. The pid's are not correctly set.
3. Same channel that is not working above this time by using a DVB card (the PID's can be seen there).

And one other clue that could be important: The linux STB has a red LED that switches on when it starts streaming. After using ProgDVB the LED remains on even if the ProgDVB application was closed. This doesn't happen with VLC (I would assume that they are sending a command to stop streaming on exit or channel change).
Last edited by seba on Tue Mar 21, 2017 3:08 am, edited 1 time in total.
| WinXP SP3 or Win10 1709 | i5 660@3.33Ghz | 4 Gb RAM | ATI Radeon HD 5450 1Gb|
| TT S2-3200 | TT 1501| Astrometa| TT Infrared Receiver| Octagon SF4008 for streaming to ProgDVB|
| Prog demux |
| VMR7 | CyberlinK video decoder (MPEG2) and FFDShow for H264 - DXVA enabled |
| ProgAR | FFDShow audio | Audio processor enabled |
| Timeshift in RAM | Buffer size 2000 |
Attachments
how it should look like.JPG
not working.JPG
not working.JPG (19.62 KiB) Viewed 5490 times
working.JPG
working.JPG (25.15 KiB) Viewed 5490 times

Re: SAT>IP Protocol support

#337
This is normal http/ts without sat>ip. And ProgDVB support that without problem. First channel in log not detected because some problem with pat/pmt.

Please record me 5 minutes sample of this channel.

ps: I am not use linux every day. How can help me install sat>ip server on virtual centos without device? From TS file.

Re: SAT>IP Protocol support

#338
Ok, then is should work as a I understand. I will record the TS streams as requested but where should I place them? Do you still have that FTP? I have not done this since 5 years ago....

I am not an expert on Linux... I got this new box a week ago pre-installed so I do not have much experience with it yet.
| WinXP SP3 or Win10 1709 | i5 660@3.33Ghz | 4 Gb RAM | ATI Radeon HD 5450 1Gb|
| TT S2-3200 | TT 1501| Astrometa| TT Infrared Receiver| Octagon SF4008 for streaming to ProgDVB|
| Prog demux |
| VMR7 | CyberlinK video decoder (MPEG2) and FFDShow for H264 - DXVA enabled |
| ProgAR | FFDShow audio | Audio processor enabled |
| Timeshift in RAM | Buffer size 2000 |

Re: SAT>IP Protocol support

#339
Ok, the files have been uploaded to the FTP. Please check the folder: 2017-03-21 seba
| WinXP SP3 or Win10 1709 | i5 660@3.33Ghz | 4 Gb RAM | ATI Radeon HD 5450 1Gb|
| TT S2-3200 | TT 1501| Astrometa| TT Infrared Receiver| Octagon SF4008 for streaming to ProgDVB|
| Prog demux |
| VMR7 | CyberlinK video decoder (MPEG2) and FFDShow for H264 - DXVA enabled |
| ProgAR | FFDShow audio | Audio processor enabled |
| Timeshift in RAM | Buffer size 2000 |

Re: SAT>IP Protocol support

#340
I have updated some of the files as it follows:

1. 0_h_0 files have been recorded using TS Recorder (all pids) => These files can be played with VLC therefore the stream is the correct one and working. Nevertheless in ProgDVB one of these streams doesn't work nor live nor as recorded file. I would say that will not be hard for you to reproduce the problem using the 0_H_0 files.

2. The ones with longer name are recorded using the recording function from ProgDVB. From these only some can be played exactly as above. These will probably be useless for you...
| WinXP SP3 or Win10 1709 | i5 660@3.33Ghz | 4 Gb RAM | ATI Radeon HD 5450 1Gb|
| TT S2-3200 | TT 1501| Astrometa| TT Infrared Receiver| Octagon SF4008 for streaming to ProgDVB|
| Prog demux |
| VMR7 | CyberlinK video decoder (MPEG2) and FFDShow for H264 - DXVA enabled |
| ProgAR | FFDShow audio | Audio processor enabled |
| Timeshift in RAM | Buffer size 2000 |