Display posts from previous
Sort by

#166 by Juergen
Teletext system (as defined decades ago) does not provide full codepage selection, as it only has three bits available for this.
So, a maximum of eight languages can be handled automatically, if the proper region is preselected, like northern or central Europe, for exmple.
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!


I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!

1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

#167 by loben
Don't understand, what you mean by that. :shock:
I don't want to handle my language automatically, I want to set czech codepage manually in ProgDVB.

#168 by SpiritOfVite
It's not a Bug, but the new Verion v4.89.3, supports yet the Windows Server 2008 Final

Thx, Prog... :D

.

#169 by Prog
Any problem with old version? With 5.x?

Re: .

#171 by SpiritOfVite
Prog wrote:Any problem with old version? With 5.x?
Yes, the ProgDVB v4.89.1 crashed, after Changing TV Channels (Scrambled, or Not), Radio "worked" but without Music.

Windows Error Message:
Problemsignatur:
Problemereignisname: APPCRASH
Anwendungsname: ProgDVB.exe
Anwendungsversion: 4.0.0.0
Anwendungszeitstempel: 47a35574
Fehlermodulname: ProgDvbEngine.dll
Fehlermodulversion: 0.0.0.0
Fehlermodulzeitstempel: 47a35557
Ausnahmecode: c0000005
Ausnahmeoffset: 00060763
Betriebsystemversion: 6.0.6001.2.1.0.274.10
Gebietsschema-ID: 1031
Zusatzinformation 1: 4fd4
Zusatzinformation 2: fa77342c66ffeb69f75f04aee58e1a66
Zusatzinformation 3: 10a9
Zusatzinformation 4: bc3cff4f55a335f740687424fce2fb20

Lesen Sie unsere Datenschutzrichtlinie:
http://go.microsoft.com/fwlink/?linkid= ... cid=0x0407

The ProgDVB v5.13 had the same Problem....


Beschreibung:
Stopped working

Problemsignatur:
Problemereignisname: APPCRASH
Application Name: ProgDvbNet.exe
Application Version: 5.13.0.0
Application Timestamp: 479ae324
Fault Module Name: ProgDvbEngine.dll
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 479ae8da
Exception Code: c0000005
Exception Offset: 0005a723
Betriebsystemversion: 6.0.6001.2.1.0.274.10
Gebietsschema-ID: 1031

Lesen Sie unsere Datenschutzrichtlinie:
http://go.microsoft.com/fwlink/?linkid= ... cid=0x0407
Sorry for my bad English, Greeting from Germany

Edit: The 4.89.3 and v4.89.4 works... v5 not testet yet.

#172 by Frozen
I think the last ver. is incredible ( 5.13.4 ) . it's fast , stable , nice CI , no crashes , scanning running smooth

but there's one "old" bug . suddenly shortcuts of main screen not works ( Mouse & Keyboard ) !!!!!
OS : Win XP SP2
CPU : P4 Intel 3.00 GHz "HT"
Memory : 2 GB
DVB-S : Sky Star 2 (2.6D) ( 4.4.0 )
Hotbird 13.0°E | Badr-3/4 26.0°E | Nilesat 101/102 7.0°W

#173 by dardruba
I got bored and angry with the crashes and problems on V4 series.
Just did a clean download and install of v5.13.4.
It accepted my SS2 but then came the crash when I tried to scan.
Now it wont load and I get the error message
ProgDVB Engine. Device not started ({BDA} no device)

What do I do now please?

#174 by Juergen
Install and use latest WDM drivers, for example.
Then, start ProgDVB and hit device list, deactivate any (half) active device and select the proper one to start.
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!


I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!

1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

#175 by texas
ProgDVB 5.13.4
If I set channel trough remote control and channel has no signal ProgDVB do not react on remote commands anymore, next channel must be set manually by mouse( channel which has signal ) , after that remote works OK

Direct access to OSD channel lists will be appreciate.
For now access to OSD channel lists is possible through main OSD dialog ( too much clicking on remote ).

assigning shortcuts for Chan+ / Chan-

#176 by rumpumpel1
assigning a shortcut to the function Chan+ / Chan- does not work.
The assignment seems to be ok, but when executing the shortcut for
Chan+ the screen is black. Pressing the shortcut for Chan- returns
to the last channel.

#177 by Juergen
This may mean, instead of changing up and down the channel list, the channel history would be used.
To confirm, please tray again, to find out, if after some channel switching and then ch- you can go back with ch+, to the station you were before.

For identifying eventual software bugs, try to use precise human logics ;)
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!


I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!

1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

Vista: crash when going into sleep mode

#178 by rumpumpel1
well, the subject says all: when setting the PC which is running under Vista into sleep mode and resuming afterwards, the ProgDVB window remains empty, the mouse pointer is busy and the only option is to kill ProgDVB.

#179 by vfrjim1
Running WinXP MCE with SP2 and Technotrend S2-3200, I am getting an error after about 2 hours of run time. The ProgDVB engine is crashing and the application does not respond and I have to end task. If I let it run long enough with will crash completely and will not be running at all. I am running the latest version of CoreAVC professional and the channel that I am watching is H264 with AC3. Here are some images, if you need more info. Please let me know.


http://rapidshare.com/files/97996943/error.bmp.html
http://rapidshare.com/files/97998630/image.bmp.html
http://rapidshare.com/files/97998779/image1.bmp.html
http://rapidshare.com/files/97998904/image2.bmp.html

.

#180 by Prog
For this card you can try WDM and BDA driver.

PS: Do you have good signal level?