I GOT A GENIATECH SATBOX USB DVBV-S AND IAM RUNNING A PROGDVB 4.90.5 (STANDAR EDITION) FOR MORE THAN I HAVE A 100%
QUALITY AND 62% LEVEL IN (ECHOSTAR 7) WHEN I RUN THE CHANNEL SEARCH THE PROG DVB ITS SCANING ALL THE TRANSPORDERS BUT CANT FOUND ANY CHANNEL FREE OR NOT WHY?
IAM NOT USING ANY SWITCH AND I KNOW THAT THE DISH ITS AIMING GOOD, COSE I TESTED WITH MY SAT BOX ON A TV .SOME ONE PLEASE CAN TELL ME WHY?
#2
Obviously your caps lock key is stuck. Please repair or exchange your keyboard.
ALL IN CAPITALS MEANS SHOUTING!!!
And reading feels like a pain in the back...
See what I mean?
Now for your problem:
Did the original software package work well, the one that came with the hardware? What exactly was in there?
If it came with a special version of ProgDVB, possibly you need the device file from it.
ALL IN CAPITALS MEANS SHOUTING!!!
And reading feels like a pain in the back...
See what I mean?
Now for your problem:
Did the original software package work well, the one that came with the hardware? What exactly was in there?
If it came with a special version of ProgDVB, possibly you need the device file from it.
My signature:
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>