progdvb.com

I find line from MyStrings.txt:

ThisFunctionNotSupportedInThisVersion=This function it is accessible in this version of application.

Isn't should be:

ThisFunctionNotSupportedInThisVersion=This function it is NOT accessible in this version of application.

Is somewhere language topic in this forum?

thanks.

I used the x86 version of ProgDVB and same codec pack and same settings as before 6.94.
The problem appeaed as soon as I installed the new 6.94.x version

But check ac3 codec in ProgDVB settings.

AC-3 is configured to work with ffdshow audio decoder.
If I tried to change decoder when the dialog appears I have the same dialog as result.

Options -> Debug and repair -> Reset

There should be 3 buttons - Backup, Restore and Reset. Backup backs up data (no reset), restore restores from backup folder or custom folder and reset resets all data and deletes everything.

Also there are bug. When I reset EPG, then epg.dat is moved to /Backup/epg.dat. epg.dat should be located in /backup/channels/epg.dat. Otherwise EPG data is lost when copying backuped data to ProgDVB root folder.

And every backup should have its own folder. Example: /Backup/Backup1, /Backup/backup2 etc or /Backup/18-06-2013, /Backup/20-06-2013 etc.

epg.dat is total not interesting for backup. After some days this information not actual. Same with "own folder"

Prog wrote:epg.dat is total not interesting for backup. After some days this information not actual. Same with "own folder"

Yes, but if I delete this file, and I want to restore previous settings from backup, I have to select channel and EPG relation for all channels. It wont only delete EPG data, it also deletes this relation.

There are problem with subtitles in some channels. Subtitles are not synchronised, usually previous subtitles are showed directly before next should be showed. So in some moment subtitles comes right time, but next subtitles comes too late.

It is not channel problem. I have simpleTV too and when I run both program in same channel, then simpleTV shows subtitles correctly and in right time, but progDVB don't.

It is not happened with all channels. Example TV1000 Premium shows correctly, but National Geographic don't. It seems they have different subtitle steam format or something and ProgDVB don't understand it correctly.

What demux?

Prog wrote:What demux?

You mean demultiplexor? It is selected "Prog".

EDIT: I tried Elecard now (others won't work) and subtitles goes little better (timing), but it is not enough good yet. Sometimes subtitles comes too late (many seconds).

Now I know when channel list width decreases. When I change its width in Normal screen mode and I switch to TV window mode, then width is OK.

But if I close ProgDVB and run it again (to TV mode), then channels width is decreased to minimum.

I've just upgraded to 6.94.2 and my problem of audio pin connector is worse !
Now it's not working either for HD ac-3 streams neither for SD Mpeg streams.
The dialog continusly appears :
-> if I click close progdvb crash
-> If I click setup the dialog appears right after validation and the loops is beginning

I can't use progdvb for both SD and HD now :/

19:56:57.107 - Video/MPEG2_VIDEO : MPEG2_VIDEO s={0,0,720,576}, t={0,0,720,576}, bmp=720x576, r=16/9, br=15305200,frametime=40ms, IF=0x0, CF=0x0)
19:56:57.132 - Add video codec 04fe9017-f873-410e-871e-ab91661a4ef7 - Pin for connection not found! 0x80040207
19:56:57.133 - CChannelGraph5::CreateRender 6
19:56:57.134 - VR: EVR
19:56:57.494 - Video pin founded. Try to founded any good codec... OK.
19:56:57.495 - СreateAudioPartOfGraph
19:56:57.495 - AudioType:MPG
19:56:57.495 - Audio/MPEG1AudioPayload : WaveFormatEx (2ch 48000 0bit formatTag= 0x50)
19:56:57.509 - Add audio codec e8e73b6b-4cb3-44a4-be99-4f7bcb96e491 - OK
19:56:57.528 - IMyGraphBuilder::CreateAudioRenderFilter::ProgAR:Périphérique audio principal OK
19:56:57.529 - Added audio processor
19:56:57.531 - AudioProcessor: Audio - {00000001-0000-0010-8000-00AA00389B71} - PCM - :CheckMediaType in MediaType (OK) 2ch, 16bits, 48000 samples
19:56:57.533 - AudioProcessor: Audio - {00000001-0000-0010-8000-00AA00389B71} - PCM - :CheckMediaType in MediaType (OK) 2ch, 8bits, 48000 samples
19:56:57.536 - AudioProcessor: Audio - {00000001-0000-0010-8000-00AA00389B71} - PCM - :CheckMediaType in MediaType (OK) 2ch, 16bits, 48000 samples
19:56:57.537 - AudioProcessor: Audio - {00000001-0000-0010-8000-00AA00389B71} - PCM - :CheckMediaType in MediaType (OK) 2ch, 8bits, 48000 samples
19:56:57.538 - Connect codec to AP - Pin for connection not found! 0x80040207
19:56:57.538 - remove and destroy AP
19:56:57.545 - Add and connect audio renderer - Pin for connection not found! 0x80040207
19:56:57.551 - Add and connect audio renderer - Pin for connection not found! 0x80040207
19:56:57.553 - ChannelGraph5::ReleaseSubClassesBeforSecondTry
19:56:57.578 - Graph::ReleaseAllFilters
19:56:57.588 - !!! DebugCriticalMesssages: Pin for connection not found! 0x80040207@FORMAT:MPG@@AUD_CODEC@@AUD_RENDER@
19:56:57.588 - !!! DebugCriticalMesssages: #graphbuilder#

H3lli0n wrote:Hi,

I've a bug with HD channels even with the latest patched version 6.94.1.
Here is the logs and I think it's related to OGG(Vorbis) codec setup which can't be saved

Do you have problem with last version of ProgDVB?

Yes just downloaded it. My post few minutes ago is related to 6.94.2.
Original problem is still present and now appears with Mpeg SD audio