progdvb.com

I found a temporary solution for the evening.
I choosed "Reset all settings" and so far ProgDVB has been able to open HD/SD/Mpg/AC3/E-AC3 channels.
Nevertheless I'm afraid to touch any of the settings because the problem could appear again.

Here are the default settings found by PorgDVB (and no I've no HDMI output ...)

Edit : Ok I modified the settings to fit my needs so far no dialog regarding the pin error appeared.

Here is the log:

20:38:58.807 - AudioType:
20:38:58.808 - Audio/AC3 : WaveFormatEx (2ch 48000 0bit formatTag= 0x0)
20:38:58.808 - Add audio codec 00000000-0000-0000-0000-000000000000 - Create filter error (Audio decoder) - 0x80040154!
20:38:58.815 - IMyGraphBuilder::CreateAudioRenderFilter::ProgAR:Périphérique audio principal OK
20:38:58.815 - Added audio renderer
20:38:58.815 - Add AP
20:38:58.920 - AudioProcessor: Audio - {00000001-0000-0010-8000-00AA00389B71} - PCM - :CheckMediaType in MediaType (OK) 2ch, 16bits, 48000 samples
20:38:58.922 - AudioProcessor: Audio - {00000001-0000-0010-8000-00AA00389B71} - PCM - :CheckMediaType in MediaType (OK) 2ch, 8bits, 48000 samples
20:38:58.923 - AudioProcessor: Audio - {00000001-0000-0010-8000-00AA00389B71} - PCM - :CheckMediaType in MediaType (OK) 2ch, 16bits, 48000 samples
20:38:58.925 - AudioProcessor: Audio - {00000001-0000-0010-8000-00AA00389B71} - PCM - :CheckMediaType in MediaType (OK) 2ch, 8bits, 48000 samples
20:38:58.927 - AudioProcessor: Audio - {00000001-0000-0010-8000-00AA00389B71} - PCM - :CheckMediaType in MediaType (OK) 2ch, 16bits, 48000 samples
20:38:58.928 - AudioProcessor: Audio - {00000001-0000-0010-8000-00AA00389B71} - PCM - :CheckMediaType in MediaType (OK) 2ch, 8bits, 48000 samples
20:38:58.930 - AudioProcessor: Audio - {00000001-0000-0010-8000-00AA00389B71} - PCM - :CheckMediaType in MediaType (OK) 2ch, 16bits, 48000 samples
20:38:58.932 - AudioProcessor: Audio - {00000001-0000-0010-8000-00AA00389B71} - PCM - :CheckMediaType in MediaType (OK) 2ch, 8bits, 48000 samples
20:38:58.987 - AudioProcessor: Audio - {00000001-0000-0010-8000-00AA00389B71} - PCM - :CheckMediaType in MediaType (OK) 2ch, 16bits, 48000 samples
20:38:58.987 - AudioProcessor: Audio - {00000001-0000-0010-8000-00AA00389B71} - PCM - :Set in MediaType (OK) 2ch, 16bits, 48000 samples
20:38:58.987 - AudioProcessor: Audio - {00000001-0000-0010-8000-00AA00389B71} - PCM - :CheckMediaType in MediaType (FAILED) 2ch, 32bits, 48000 samples
20:38:58.992 - Try connect AP to renderer ... OK.
20:38:58.992 - Graph::AfterRender
20:38:58.993 - Graph::SetVolume 100% 0db
20:38:58.993 - Graph::SetAudioChannelMask

Same problem with ac3filter?

Also you can try disable audio processor.

Hello
I found that video format AVS Video,progDVB can't play video,and scan this Video program Change to broadcast format, I recorded this video and audio source and send to your email,please check,thank you!

Strange. Look a picture -> http://oi44.tinypic.com/15mn289.jpg

I use IPTV and TV-tuner in same computer. IPTV uses xmltv as EPG and TV-tuner uses DVB-T channels and I don't know how EPG comes, but it comes itself. I don't use xmltv for this.

First look IPTV channel (left). There are correct title and description for current program, but there is no space between title and description for next program.

And for DVB-T (folder TV-tuuner). There are two title names and there are space between double title name, but THERE IS NO SPACE between second title and description for current program. Also next program info have double title and no space between second title and description.

I hope you understand what I said. It seems it is not source EPG problem.

Please send screen of same in EPG dialog in list mode

IPTV channel OSD: IPTV EPG now: IPTV EPG next: DVB-T channel OSD: DVB-T EPG now: DVB-T EPG next: As I mention EPG source is different, but there should be space between next program title and description.
And it seems program title is also part of its description of DVB-T channel. I don't know how read DVB-T EPG raw data. I think program title and its description should be separated somehow.

there is a problem regarding to new progdvb version (6.95.1) as the prog media server option does not appear under service menu as usual so please advice.

note : i think that the prog media server module failed to start with this version

LiivaneLord: You can select channels for import xmltv.

moody1976: x32?

Mr PROG : thanks so much the module working with non internet channels ,

may i report another problem :

befor prog media server Ver.4 , VLC was working fine in any mode HTTP mode or IPTV to play back the channels but now with new version VLC faild to playback the channels in any mode
as i received error message "your input can't be opened " and in error details (access_http error : failed to read answer)

thanks a lot.

You can open m3u link from server in VLC.

^^^^^^^^
Mr prog are you ask me or advice me ,
If you asking me the answer i could not open the channels link via VLC on server also.....
If you advice me plz give me a more details ,
Thanks again.

Check network properties of server and open html page of server at first.
I am not have good idea why it not working on your side. It is very simple not request any setup.

^^^^^^^^
In all cases the html page is working ;
I mean with new prog media server 4.03 the HTML page working but VLC faild to play the channels while windows media player is working well.!!!!!!!!!!

Thanks.

Why can't you stop the current (manual) recording via the scheduler anymore? There used to be a Command "Stop Recording", that you could program for a certain time. This is not available no more since a few versions, maybe > 6.90 or so.