I do not remember, it was like that. You've got the latest version? Check the path to write and adequate space for this.FTA_Boy wrote:hi Prog, some times time shift become UN-selectable....
hello sir, it was like what ?! another issue in timeshift you know ?V.Zhukoff wrote:I do not remember, it was like that. You've got the latest version? Check the path to write and adequate space for this.FTA_Boy wrote:hi Prog, some times time shift become UN-selectable....
tried this before, didn't solved the high cpu usage. it only happen when channel is freeze and cant unscramble it. so when there is no video (steam) incoming ,dose it relate to video render or code?! i dont think so. the channel should be paused when cant unscramble channel and there is no video and .... so when channel is paused no more high cpu....Prog wrote:You can try change video renderer and video codec with DXVA low CPU using.
OK, but can you code some lines that detect this situation which when cant unscramble channel (DCW code didnt received) Pause timeshift/channel. it think this will solve the problem because in old versions of progdvb when lost signal and there wasnt video high cpu use was happening but you solved that by pause the timeshift(pause if there is no traffic). by the way thank you for your good work.Prog wrote:This is normal. When impossible unscramble - traffic is total random and application/codecs can request lot of CPU or crash. This is part of protection.
@ProgFTA_Boy wrote:Hi Prog, the problem is when i change the Audio stream (language of channel) video will stop and the only way to watch channel is to reopen it, every time on every channel if i change Audio (right click on video) i should reopen or change channel. after reopening will play with new selected Audio with no problem ...
thanks
this problem solved in new version 6.96 , thanks Code: Select all
19:48:56.190 - #################### Start stream. (0.577ms) #######################
19:48:56.190 -
19:48:56.194 - TimeShift::Cursor SetChannel
19:48:56.194 - ReaderCursor::SetPosition 0 (w=0)
19:48:56.194 - Prereader::SetChannel unmask 1
19:48:56.194 - MDPlugin::SetChannel 12263
19:48:56.195 - TransponderManager::SelectChannel
19:48:56.196 - TsInputTrafficProcessor::SelectChannel 12263
19:48:56.196 - Api2BaseModule::UpdateAllOpenedChannels 1
19:48:56.196 - TsInputTrafficProcessor::UpdateChannel 12263
19:48:56.196 - PreScanner::StartChannelIsReady
19:48:56.196 - ChannelGraph5::AfterDetectChannelParams
19:48:56.197 - VideoMediaTypeDetection: mpeg2
19:48:56.197 - SimpleTsDemux::Init apid=2510, vpid=2508
19:48:56.197 - TimeShift::Cursor PushMode 1 1 (0)
19:48:56.197 - ReaderCursor::SetPosition 0 (w=0)
19:48:56.197 - Prereader::EnablePushModeAndStartPlayback 1
19:48:56.197 - PreScanner::StartPmtParserIfNeed
19:48:56.198 - PlayTimePmtParser::OpenParser 12263
19:48:56.198 - ChannelGraph5::CreateGraphForOsdOnly
19:48:56.199 - CChannelGraph5::CreateRender 6
19:48:56.200 - VR: EVR
19:48:56.275 - First data in TS buffer
19:48:56.295 - Graph::AfterRender
19:48:56.299 - Graph::SetVideoRect {8 8 540 568}
19:48:56.304 - Graph::SetVideoWindowRect {96 0 1074 734}
19:48:56.323 - Graph::Run
19:48:56.338 - Graph::Run 1
19:48:56.338 - Graph::SetVideoRect {8 8 712 568}
19:48:56.360 - Graph::SetVideoWindowRect {96 0 1074 734}
19:48:56.364 - ChannelGraph5::SetActiveState 1
19:48:56.398 - Graph::OnVideoWindowPositionChanged
19:48:56.438 - * s:46 q:47 tr=-183009916 (-3629528)
19:49:12.708 - Cache overload (Incoming Stream Cache -5120000) !!!
19:49:12.719 - Cache overload (Incoming Stream Cache -5120000) !!!
19:49:12.728 - Cache overload (Incoming Stream Cache -5120000) !!!
19:49:12.739 - Cache overload (Incoming Stream Cache -5120000) !!!
19:49:12.749 - Cache overload (Incoming Stream Cache -5120000) !!!
19:49:12.760 - Cache overload (Incoming Stream Cache -5120000) !!!
19:49:12.771 - Cache overload (Incoming Stream Cache -5120000) !!!
19:49:12.781 - Cache overload (Incoming Stream Cache -5120000) !!!
Code: Select all
Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangB1
Application Name: ProgDvbNet.exe
Application Version: 6.96.0.0
Application Timestamp: 52860660
Hang Signature: 0216
Hang Type: 256
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Hang Signature 1: 02167a7edbb3f5e10a457cab48ea7687
Additional Hang Signature 2: 0871
Additional Hang Signature 3: 0871c48d3f78dc925dc0412af724474b
Additional Hang Signature 4: 0216
Additional Hang Signature 5: 02167a7edbb3f5e10a457cab48ea7687
Additional Hang Signature 6: 0871
Additional Hang Signature 7: 0871c48d3f78dc925dc0412af724474b
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
hi again, what do you mean "must disable stability mode" ? i check Stability Mode in option , if any crash happen engine should restart right ? but the whole program will crash ....Prog wrote:ProgDvbEngineRun.exe? Last version must disable stability mode...