progdvb.com

Please try 4.82.4 or 5.03. Must work.

No, the problem is the same. I try to install 4.82.4 and 5.03 and Tehnotrend 3200 driver then I try with SkyStar HD original drivers and again no signal for DVB-S2 channels. I try also to put manually the channel Premiere HD with ProgDVB channel editor, and again no success.

Just the same problems for me!
How can we activate manualy the modulation field to change it to S2?
Should we add something in the transponders line after the fec in the satelites.ini file to change in S2?

70=12441,V,27500,910,S2
71=12522,V,22000,910,S2
72=11914.5,H,27500,910,S2
73=12721.5,H,22000,910,S2

This is the end of file 0192.ini in my transponders folder for ASTRA 19.

And I have progres. Untill now I always install the driver:
--------------------------------------------------------------------------
TT-PCline budget family
Version 2.19h (28.11.2006) for Win98/ME/2000/XPTM (21,8 MB)
--------------------------------------------------------------------------

I try with:
----------------------------------------------------------------------------------
BDA-Drivers for:
- TT-budget / Nova Version 4.4.10.18 (09.02.07) Windows XP and Vista 32bit driver
----------------------------------------------------------------------------------

h**p://www.technotrend.com/english/download/download.html

And now on ASTRA 19, 12721 (8PSK) and 12721 (8PSK) work fine. But 11914 (QPSK) not work, no signal. So I think the problem is modulation, 8PSK work fine and QPSK not work. Please tell me what is the problem.

Thank you!

May be 11914 not DVB-S2?

11914 H 27500 is S2 Premiere HD, I check everyware. With my original softare on the original CD from technisat on this frequency I have very good signal.

I allways use http://www.satcodx.com/, http://www.tele-satellite.com/
world of satelites II program to update my transpoders files allways after installation of every new version of progdvb saving the files with skystar.ini option. I just found in the above post that we should add the ,S2 parameter at the end of the transponder line because the program does not yet. I did so to check www.euro1080.com (I have a subscription and irdeto card) in W3A at 7E in 0070.ini:
"[SATTYPE]
1=0070
2=Eutelsat W3A

[DVB]
0=72
1=10880,V,17360,34,S2; Euro 1080
2=...."
No signal at all!
I aslo tried to add a modulation switch like 8psk after ,S2, but also nothing. The unchangable modulation window rests at 64...
At the same time I receive luxe HD 1920 1080 from the next transponder at W3A and Aslo Euro 1080 HD4 and 5 that are FTA with technisats program and also premier HD, SAT1HD from 19.
I have Skystar HD with its last bda drivers. I did not find Skystar HD in bda pci card list and live it at auto.
HELP!

pronto123 wrote:Now I use ProgDVB 5.00.6 but the problem is the same. Also not work well the switching from Astra to HotBird i have 2 LNB's with diseq switsc. Sometime I have signal to HotBird somtimes not.

Same problem here on my skystar hd no signal on the second lnb both under progdvb 4.84 both on progdvb 5.0.
I don't know why.

I want to try to install the technotrend driver but on the site i did not find the s2 3200 anyone could tell me the name of the software i have to download. I have to install both the driver both the technotrend dvb-player software ?
Thank you.

s2 3200

This is a ´TT Budget´ card so download BDA driver for TT Budget ...

I have to install both the driver both the technotrend dvb-player software ?

Better it is i think...maybe some components were used by progdvb

I have disinstalled old technisat drivers, and installed the technotrend driver both the tt budget both the tt center tv.The tt center tv don't see the card and does not work and the latest progdvb vers.5.08, still has same problem not switch from hotbird to astra. I see the hotbird channel and if i make a channel search under astra progdvb find the hotbird's channel
I sospect the old driver disinstallation it's not enought ,maybe i must go in the regedit to delete manually all the technisat key.
What do you thinh about.
Thank you.

in use of bda drivers there are DiseqC problems since a long time (as you can read in the forum)...

The bda concept (comes from microsoft) don´t know about diseqC (only made for dvb-T...)...it works in the original software because manufacturer use dirty tricks to make this possible...and for every different card this is an other trick used by the manufacturers....

Thats the problem with dvb-s cards running on bda drivers...

what i can do now ?
The big mistery is : i have two hard disk on the first hard disk progdvb see only hotbird satellite on the second progdvb see only astra.

wait for new progdvb versions ....or try other software...

The big mistery is : i have two hard disk on the first hard disk progdvb see only hotbird satellite on the second progdvb see only astra.

???

Imean ican star with my pc wit tw different hard disk if i start with the first progdvb see only hotbird if i start with the second hard disk progdvb see only astra.