progdvb.com

With the latest version 6.49 at minimizing and when changing channels here gives these errors:
Also, when I recording and minimize the program again appears this error, the program stops working and then closes itself.
Noticing changes in the scanner, runs faster but there is still much to be desired .

Problem with subtitles we see that it is not fixed.
Subtitles are exported many right thus lose many words in sentences.
Problem with sound is not right, when changing from one channel to another channel sound interrupted while listening to music is seen most clearly.
Came out already so many new versions and old problems stay where we are alarmed so long ago.

ProgDVB 6.49.4 (non-pro):

Install error:
---
ProgDVB Setup / Error opening file for writing

C:\Programme\ProgDVB\Scheduler.dll
C:\Programme\ProgDVB\ProgDvbService.exe
C:\Programme\ProgDVB\ProgDvbEngine.dll

Click [Abort] to stop the installation, [Retry] to try again, or [Ignore] to skip this file
---

ProgDVB was installed over an installed 6.49.3 on a german WinXP home.

I clicked [ignore] a first file, then second and third appearded with same error.

After Install, I just reinstalled again, and then, the error did not occur again ...

That mean scheduler is working while you install ProgDVB. try disable scheduler and install again.

Hi!

I'm currently using ProgDVB free x64 version 6.49.4 and having a really annoying problem my DVB-T device.

Moving from a channel to another, it takes quite a lot to reinitialize the tuner card and tune-in and this leads frequently to crash the driver so that it won't be accessible until next Windows restart.
The same occurs switching from fully skinned windowed to TV-only mode or vice-versa, or doing whatever else requires to reinitialize the tuner device.
No problem at all using the same device and same drivers with Windows Media Center.

My TV-card: Avermedia AverTV CaptureHD Hybrid PCI-E (mod. H727)
Drivers: v1.12.64.31 BDA-compliant and fully working with Windows Media Center
OS: Windows 7 x64

Thank you for your kind support!

You can try change Settings->Device Options->Use tuner request...

Hi,
I have a little problem..

when i use a scheduler and i set "suspend" after recording, my pc go to suspend mode but don't close progdvb!!
When i turn on my pc again, i find progdvb open..
I would a new option "Close & suspend"
thnx!

I Have a Problem since many Version: but this time i wasn´t able to solve it by myself:

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-12-21T22:40:44.000000000Z" />
<EventRecordID>50725</EventRecordID>
<Channel>Application</Channel>
<Computer>Georgs-PC</Computer>
<Security />
</System>
- <EventData>
<Data>ProgDvbNet.exe</Data>
<Data>6.50.0.0</Data>
<Data>4d0bb9b7</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>000000001e0ec757</Data>
<Data>63c</Data>
<Data>01cba16012012e2c</Data>
<Data>C:\Program Files\ProgDVB6.50\ProgDvbNet.exe</Data>
<Data>unknown</Data>
<Data>5877d237-0d53-11e0-a55a-001a4d56141c</Data>
</EventData>
</Event>

I have WIndows 7 x64 Professional and the 64bit version of Progdvb, i have also tried the 32bit version.

When i updated the old version i have the Problem that i can´t start ProgDVB any more, when i start a error, it takes a about 10 Seconds and Windows derminates ProgDVB after.
I Have tried to uninstall and unplug my DVB-T Antenna and the TEVII S2 Box but it didn´t help.
Prog DVB won´t start. I have also deinstalled and installed Progdvb many many Times.
Didn´t help.

So i Hope someone here can help me, and Install WIndows7 new is not a Solution !

Mfg Griesi

prog 6.50
on all channels of this transponder the prog crashes:
12034H,27500 - 7.0W Nilesat
only this frequency from the whole satallite.

EventType : clr20r3 P1 : progdvbnet.exe P2 : 6.50.0.0 P3 : 4d0bb917
P4 : mscorlib P5 : 2.0.0.0 P6 : 471ebc5b P7 : e1 P8 : 16
P9 : system.argumentoutofrange

any help please?

Griesie: Same problem with x32? Please try start with /Debug key.

mhndsh: I am not have access to this transponder. Please record me sample in Service->Pid recoder->All TS. 4-5 minutes. Also you can try /Debug key also.

Hi.. Some versions ago, progdvb does not close well with Prof7301 on Win7 x86.

¿anyone confirm?

can't record bcz it crashes and error massege appear after 2 seconds, even debug freezes
what could it be for this only transponder....
debug picture is attached..

----------------------

prog 6.50
on all channels of this transponder the prog crashes:
12034H,27500 - 7.0W Nilesat
only this frequency from the whole satallite.

EventType : clr20r3 P1 : progdvbnet.exe P2 : 6.50.0.0 P3 : 4d0bb917
P4 : mscorlib P5 : 2.0.0.0 P6 : 471ebc5b P7 : e1 P8 : 16
P9 : system.argumentoutofrange

any help please?

Try start ProgDVB with /NoGraph or/and select radio channel.

Prog wrote:Try start ProgDVB with /NoGraph or/and select radio channel.

Same with nograph and radio channels..

Do you have same on other transponders?