Page 1 of 1
ProgTV as client of TVHeadend
Posted: Tue Jan 23, 2018 10:06 pm
by 111111
Is there a chance to be made client for
TVHeadend,
with will accept:
Currently, only if disabled authentication on server, access is possible
with playlist and xmltv added (logo taken from playlist)
Re: ProgTV as client of TVHeadend
Posted: Wed Jan 24, 2018 7:01 am
by Prog
Send me link on API? Do you have this server for test?
Re: ProgTV as client of TVHeadend
Posted: Wed Jan 24, 2018 7:42 pm
by 111111
Re: ProgTV as client of TVHeadend
Posted: Thu Jan 25, 2018 5:34 am
by Prog
Ну так давайте ссылку на API. Как из клиента обращаться к северу.
Re: ProgTV as client of TVHeadend
Posted: Thu Jan 25, 2018 12:51 pm
by 111111
Пожалуйста, извинитесь за то, что я не программист.
клиенты уже имеют PLEX KODI VLC
здесь приведен пример вызова из плагина
PLEX
https://github.com/realriot/tvheadend-n ... _init__.py
https://github.com/pgaubatz/TvplexendCh ... _init__.py
Kodi
https://github.com/kodi-pvr/pvr.hts
VLC
https://github.com/BtbN/vlc-htsp-plugin
у TVHeadend ест двух основних портов
:9981 для WEB-UI / HTTP-API / Streaming
:9982 для HTSP протокол и Streaming
если к TVHeadend будед запрос
http://localhost:9981/api/serverinfo
то он ответит в JSON как
{"sw_version":"4.3-993~gfe04a70","api_version":19,"name":"Tvheadend","capabilities":["caclient","tvadapters","satip_client","satip_server","trace","libav"]}
https://github.com/tvheadend/tvheadend/ ... er/src/api
API
https://github.com/dave-p/TVH-API-docs/wiki
Re: ProgTV as client of TVHeadend
Posted: Sat Jan 27, 2018 8:18 pm
by 111111
Мне нужно добавить, что основные порты TCP:9981 и TCP:9982 заменяемый.
Если необходимо, я могу предоставить доступ к работающему серверу
Re: ProgTV as client of TVHeadend
Posted: Sat Jan 27, 2018 10:21 pm
by Prog
А что за сервер? Но вопрос всё тот же, какое API там используется?
Например там есть SAT>IP который в ProgDVB/ProgTV есть но по отзывам - не со всеми серверами работает.
Re: ProgTV as client of TVHeadend
Posted: Sun Jan 28, 2018 9:24 am
by 111111
API
https://github.com/dave-p/TVH-API-docs/wiki
In TVHeadend there is a Sat>ip server, but it is very time consuming to scan
it take 25min to scan Astra 19.2 (boring slow) and not found anything.
Also when everything is scanned, filtered, sorted, EPG optimized and channel logos (piccons) set and transcoded
no need to use Sat>ip
Re: ProgTV as client of TVHeadend
Posted: Sat Sep 22, 2018 11:00 pm
by 111111
Is there will be any try to implement support to TVHeadend?
Re: ProgTV as client of TVHeadend
Posted: Sun Sep 23, 2018 1:09 pm
by Prog
?
No changes in SAT>IP for this time.
Re: ProgTV as client of TVHeadend
Posted: Mon Sep 24, 2018 6:07 am
by 111111
Prog wrote: ↑Sun Sep 23, 2018 1:09 pm
?
No changes in SAT>IP for this time.
Sat>ip protocol is very unstable via Internet,
no EPG no Channel logo no DVR no Transcoding profiles no Timeshift.
Do xtream-codes need to implement sat>ip to work?
Re: ProgTV as client of TVHeadend
Posted: Mon Sep 24, 2018 6:32 am
by Prog
Not clear. But xtream is supported in ProgTV also.
Re: ProgTV as client of TVHeadend
Posted: Mon Sep 24, 2018 8:29 pm
by 111111
So closed source software is easy to have native client in ProgTV,
and in same time open source one need to use third party protocol for embedded devices (sat>ip) to be compatible?
Sorry for sarcasm, but:
will soon we will see implementation of transcoding profiles for sat>ip servers EyeTV Netstream 4C/4Sat
