Page 1 of 1
Problem with 5.12.2
Posted: Tue Nov 27, 2007 9:51 am
by marcopt
This morning i have installed the new version of progdvb, but.. no foud any service (transponder):shock: and no lock satellite (hotbird13°)
with previous version and other program all ok.....
I have skystar2 S.O. vista32
Please help...
Marco.
Posted: Tue Nov 27, 2007 10:03 am
by Juergen
Do you get normal level and quality?
What happens, if you are trying a manual scan on a known working transponder?
Posted: Tue Nov 27, 2007 10:10 am
by marcopt
Hi, no found any channel, no signal meter...
Posted: Tue Nov 27, 2007 10:56 am
by Juergen
What driver do you use, exactly?
Posted: Tue Nov 27, 2007 11:39 am
by marcopt
4.4.1.0
Posted: Tue Nov 27, 2007 5:09 pm
by marcopt
I only have these problems with progdvb?
Posted: Tue Nov 27, 2007 5:19 pm
by Juergen
marcopt wrote: no signal meter...
what do you mean, no meter exists, meter greyed out, or always reading zero?
Please answer seperately for status bar, scan transponder and (if working) on OSD.
I don't have Vista or an SS2 to test here, that's why I am bound to plain logics, to perhaps get closer to the source of your trouble...
Posted: Tue Nov 27, 2007 5:30 pm
by marcopt
I installed an old version and now everyone works (ProgDVB5.11.3)
Juergen, thanks for your help.
Marco
Posted: Tue Nov 27, 2007 7:08 pm
by layer0
Ok,
something between 5.12.1 and 5.12.2 seems to have messed up skystar2.
I've the same problem: When tuning a channel via Setup4PC and then manually scan the transponder with progdvb 5.12.2 I get some channels. When I select another transponder before and "Lock", no reception, i.e. Level remains on a normal (however here quite bad) level, but quality goes to zero.
Status bar seems to be identical.
German Vista 64, Driver 4.4.1
Complete channel search therefore does not find anything, also.
Jan
BTW: The "saving channels" problem is fixed by not finding channels any more, though...
Posted: Tue Nov 27, 2007 7:17 pm
by mario910
Same problem here.
Skystar 2 PCI(Driver: 4.4.1.0) Vista32 German,
Software (DVBViewer TE) from Technisat works, but in ProgDVB 5.12.01 + 5.12.02 the Level is 25 % and quality is always 0 %.
Posted: Tue Nov 27, 2007 9:12 pm
by korogui
Same here... Im using a SS2 card, and it cant lock any transponder.
Looks like its not sending the correct LNB frequency to the card... Setup4PC always shows it with "0","none","none".
Posted: Thu Nov 29, 2007 11:08 pm
by layer0
Seems to be fixed for the future+workaround available:
viewtopic.php?t=2003
Jan