Page 1 of 1
HDTV Playback doesn't start
Posted: Thu Dec 13, 2007 5:29 pm
by Mezga
Hi all,
i bought ProgDVB Prof a few days ago, becaus i need the AVC Support.
If i klick on a HD Channel no sound or picture appeares. (and no error message)
At File->Properties no Codec is in the Filterlist and no Framerate/Bitrate.
I only see the EPG?? message from the channel (18:08 Simpsons) in the list at the bottom from progdvb. Signal 61-65% 100%
But my Codec works fine with Graphedit and the Testfile from the Channel whitch i recorded with TSReader.
It seems to me, that ProgDVB wont try to decode the channel like in the Standart Version...
Posted: Thu Dec 13, 2007 11:54 pm
by sinn3r
@Mezga: this seems to be a common problem, I and some other guys experience the same problem. Which DVB-Card do you have and which dvb-s2 program on which satellite did you try to watch?
Posted: Fri Dec 14, 2007 6:10 pm
by Mezga
It´s a Hauppauge Card (C-1500 Budget). With the latest BDA Drivers 5.0.0.6.
German Cable. Pro7HD, Sat1HD and AnixeHD.
With TSReader and a Local Stream to VLC or MediaPlayerClassic it works fine. But that´s not the best way to watch TV...
.
Posted: Sun Dec 23, 2007 3:59 pm
by Prog
I hope fix it in next version.
.
Posted: Wed Dec 26, 2007 1:08 pm
by Prog
Any problem with current version?
Posted: Wed Dec 26, 2007 8:50 pm
by Mezga
Yes and No
Now AVC works basicly.
But sound is async and picture is stumbling? (bucking?, stocking?, ruckelt<-german)
With the same graph-file (and same configuration) on the old 1.x Engine is works perfect.
It sounds to me like a local problem on my machine, but it is 100% the same configuration and the same codecs... only different progdvb versions...
Core2Duo6750, 2Gig Ram, WinXP, Ati HD2600
.
Posted: Fri Dec 28, 2007 2:54 pm
by Prog
Please try 5.12.6 also.
Posted: Fri Dec 28, 2007 4:43 pm
by Mezga
5.12.6
Sound is async, too. (5-7seconds)
Picture is now ok. Thanks a lot !
.
Posted: Fri Dec 28, 2007 6:12 pm
by Prog
Hm. What channel async? It is free channel? Can you record sample for me in TS?
Posted: Mon Dec 31, 2007 2:55 pm
by Mezga
Channel Name is Pro7HD, Sat1HD and AnixeHD.
All of them are fta channels.
Check your PM´s for the URL of the Sample TS
.
Posted: Mon Dec 31, 2007 4:56 pm
by Prog
Downloaded. Thanks.
Posted: Tue Jan 08, 2008 9:09 pm
by Mezga
With 5.12.7 still the same Problem.
Tried Vista -> same Problem an much more
Reinstall XP -> same Problem
Any other User´s with this Problem ?
Posted: Tue Jan 08, 2008 9:40 pm
by DanishC
Hey
I have the exact same problem.
The only resolution I came to was downgrading to 4. verisons and now it works fine.
Try that out.
.
Posted: Tue Jan 08, 2008 10:48 pm
by Prog
5.x and 4.x have same engine and must total work same way... May be problem in plugins?
Posted: Sun Jan 20, 2008 8:07 pm
by Mezga
No Plugins, no other extensions. Fresh and clean installation...
Since 4.88.8, i can´t run the 4 Version. Crashes at startup. Only 5 is working.