Page 1 of 1

LNB Change too slow

Posted: Fri Jan 04, 2008 8:08 am
by silverman06
Hi

I`ve got two Problems :((

Astra 19,2 and Hotbird 13

When I use BDA 5.0.0.6 driver (newest) for my Technotrend S2-3200 at ProgDvb 4.85.3 on WinXP Media 2005 everything works fine. Only the Change of the LNB is too slow, I have to click on a channel from another LNB a second time after some seconds to provide it. Channel-Change at the same LNB works with one klick without a problem.

When I use BDA 4.0.0.18 driver everything works better, but only one LNB (Hotbird) can be found. Don`t know why. other people havent got this problem :((

Can someone Help me, please?

.

Posted: Fri Jan 04, 2008 9:19 am
by Prog
Yes, channel on other LNB must work litle big slow. Maximum of 2 seconds a difference

Posted: Fri Jan 04, 2008 11:06 am
by Juergen
DiSEqC control needs some extra time, but normally this should not exceed half a second.
Try to play with the 'distinguished by' settings, there are just four possible combinations.
If this won't help, try to activate option 'refresh channel if lost signal'. By this ProgDVB will repeat the procedure automatically if failed.