progdvb.com

1. When "audio processor" function is activated, video and audio usually does not synchronize (frame skipping in video decoder does not help). When I turn "audio processor" off, sometimes after changing a channel video-audio are not matched, but video decoder slowly synchronizes streams and everything seems ok. As long as there are synchronization issues, I am unable to use equalizer.
Tried different audio and video decoder combinations and settings - haven't found a cure

2. Another problem (not solved for a long time, I have to mention it over and over again): sometimes (~10-20% of all switching times) after switching channel heppens one of the following:
a) I see no video (or video freezes instantly) but I can hear audio. reswitching channel helps
b) I see no video and audio at all, channel reswitching doesn't help at this case. Restarting ProgDVB helps.
c) I see video but I don't hear audio or sound is corrupted. Reswitching channel or pushing "next" button (timeshift control) helps.


Using: ProgDVB 6.01, bitcontrol mpeg video decoder, elecard audio decoder, VMR9.

Try remove empgpdmx.ax

remove that elecard demux filter is good for most of channels for me. The elecard demux is bad!!

Prog wrote:Try remove empgpdmx.ax

That didn't help a bit. It doesn't matter what audio or video decoder I choose: elecard, cyberlink, bitcontrol, nvidia, ffdshow... THE SYMPTOMS ARE ALMOST THE SAME. By the way: I'm not going to choose any other video decoder than bitcontrol, I have found it the best well working dvb video decoder of all, elecard and all other still doesn't function properly or have serious bugs.

I have tried ProgDVB from earlier versions like 5.14.... and channel switching is still tragic....sometimes I have to reswitch the channel several times in order for program to open it properly...
Make channel switching work properly and I will be finally happy, that is the most annoying bug of all.

Is it possible to have a demuxer as a choise in ProgDVB. Thx

xenixaz
i have same as yours problem 2c and live with this :\
i use "pause" for correct bug...
Prog knew this bug and i hope found and correct them.... sometime...

So you mean that this happens because of demuxer? So what demuxer does ProgDVB use if I choose for example BitControl video decoder and Cyberlink audio decoder?