Page 1 of 1
problem with DISEqC ProgDVB6.20.4Std with 2 satalite
Posted: Tue Sep 22, 2009 5:52 pm
by man2007
problem with DISEqC ProgDVB6.20.4Std with 2 satalite
in 26E - 25.5 E
the stalite 25.5 E not get any signal in scan
Eurobird 2 not work
Posted: Wed Sep 23, 2009 10:31 am
by nuschii
Similar problem here. Got a simple DiSEqC 2.0 Switch to choose between 19.2 E and 28.2 E. Hardware is working fine, since both satellites can be scanned and tuned using the dvbutils on Linux.
However, no success using ProgDVB. It doesn't matter which setting I use (Simple, DiSEqC 1.0, DiSEqC 1.1) and it doesn't matter which port I choose for Eurobird 1 (28.2 E). When I scan for programs all I get are 19.2 E transponders.
Any suggestions?
Hardware: Technisat Skystar 2 TV PCI with BDA driver 4.5.0
Software: Windows Vista SP2, ProgDVB 6.20.04
.
Posted: Wed Sep 23, 2009 2:55 pm
by Prog
2man2007: What DVB card?
2nuschii: Check settings->Device options. Must selected technisat. positioner not supported by this driver. But switch must work.
Posted: Wed Sep 23, 2009 6:02 pm
by nuschii
@Prog: Additional API is set to Technisat. Also tried "Auto [Technisat]". No effect.
Btw: Here is my DiseqcTree.ini
Code: Select all
[Main]
TunerCount=1
Mode=255
[Tuner]
ID=4
[Tuner_0]
ID=5
CableTransponderList=
Caption={BDA} TechniSat BDA Digital Tuner
DevID=8C18D8A0026264610064657669ED
[Tuner_0_0]
ID=2
ListName=192;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=1
[Tuner_0_0_0]
ID=1
ListName=192;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_0_0_1]
ID=1
ListName=282;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
There are two times LNB Settings for 19.2 E. Is this normal?
Posted: Thu Sep 24, 2009 11:13 pm
by man2007
my dvb card kworld
the best version work with diseq
ProgDVB6.06.5Std
the new
ProgDVB6.20.4Std
not work good and not get correct channel in sat
when scan 26 e get some channel from 7w etc
Posted: Thu Sep 24, 2009 11:15 pm
by man2007
this in ProgDVB6.06.5Std work good
[Main]
TunerCount=2
Mode=2
[Tuner]
ID=4
[Tuner_0]
ID=5
CableTransponderList=
Caption=KWorld DVB
DevID=00000000026B776F726C640064F9
[Tuner_0_0]
ID=2
Type=4
[Tuner_0_0_0]
ID=1
ListName=3530;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_0_0_1]
ID=1
ListName=130;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_0_0_2]
ID=1
ListName=255;0;260;1
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_1]
ID=5
CableTransponderList=
Caption=Internet TV
DevID=0000000009697476006465766904
Posted: Fri Sep 25, 2009 11:35 pm
by sos13
work OK for me .
kworld dvb-s 100
.
Posted: Sat Sep 26, 2009 7:05 am
by Prog
Try copy BDA module from last good ProgDVB.
Posted: Sat Sep 26, 2009 11:05 pm
by man2007
sos13 wrote:work OK for me .
kworld dvb-s 100
thank you
but me used
KWorld.device
not used BDA.device
but with all in new version with progdvb not work good with diseq
1 sat get ok good
other ex.
when scan in 26E sat get channel from 7W sat not in 26E ? big problem !
.
Posted: Sun Sep 27, 2009 7:07 am
by Prog
I am recomend use BDA module.
Re: .
Posted: Fri Oct 02, 2009 4:59 am
by man2007
Prog wrote:I am recomend use BDA module.
thank you but with bda not work good with diseq
.
Posted: Fri Oct 02, 2009 7:19 am
by Prog
Try change Settings->Device options. Must selected kworld.
Re: .
Posted: Mon Oct 05, 2009 9:25 pm
by man2007
Prog wrote:Try change Settings->Device options. Must selected kworld.
thank you fixed the problem
select BDA then
device option ( kworld ) fixed the problem with diseq
**********but 2 problem
1 problem with all kworld.device or BDA.device
( some time when change from the channel to other channel in hotbird diseq ( B) loss the signal
fixed with
setting>>>other>>>>select ( Refresh channel onlost signal )
==========
the problem 2
with kworld.device the signal
level = 100%
Quality= 100 %
with BDA.device the signal not good
level = 36 %
Quality = 100 %
------------------------------
DiseqTree
Code: Select all
[Main]
TunerCount=2
Mode=2
[Tuner]
ID=4
[Tuner_0]
ID=5
CableTransponderList=
Caption=Internet TV
DevID=0000000009697476006465766904
[Tuner_0_0]
ID=2
Type=4
[Tuner_0_0_0]
ID=1
ListName=3530;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_0_0_1]
ID=1
ListName=130;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_0_0_2]
ID=1
ListName=255;0;260;1
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_1]
ID=5
CableTransponderList=
Caption={BDA} DigiGo DVBS BDA Tuner/Demod
DevID=A35715FC026264610064657669DC
[Tuner_1_0]
ID=2
Type=2
[Tuner_1_0_0]
ID=1
ListName=3530;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_1_0_1]
ID=1
ListName=130;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_1_0_2]
ID=1
ListName=255;0;260;1
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
