Page 1 of 1
Not working ProdDVB Versions - USB DVB-T Stick Terratec T3
Posted: Fri Jun 25, 2010 9:56 am
by fulbrich
Hi,
I want to tell you about my testing with PROGDVB, Terratec T3 on my Windows XP Laptop.
DVB-T USB Stick : Terratec T3
DVB UST Stick Driver : Terratec 2.3.3.27 (18.02.2009)
USB : USB 2.0 port
Windows XP, english, SP3
Works with :
# ProgDVB Version 4.92.3 (4 ?) [3.08/Standard Edition] (Setup Named as 4.92.4)
-> Channels are detected
--------------------------------------------------------------
Does not work with :
# ProgDVB Version 5.16.02 Standard Edition
# ProgDVB Version 6.43.01 Standard Edition
-> Problem is that no channels are detected.
-> Channels are scanned
-> Level meter shows different levels
-> Quality meter shows always 0 (zero)
-> no channels detected
I am a little bit sad abaout this, because I would like to use the newest version and maybe pay for it.
Best regards,
Frank
Re: Not working ProdDVB Versions - USB DVB-T Stick Terratec
Posted: Fri Jun 25, 2010 12:10 pm
by Prog
Try select Microsoft in Settings->Device options.
Also start ProgDVB with /Debug right.
Re: Not working ProdDVB Versions - USB DVB-T Stick Terratec
Posted: Fri Jun 25, 2010 6:11 pm
by fulbrich
Hi PROG,
thanks for your response. I created the following screenshoots.
Working Software
# ProgDVB Version 4.92.3 (4 ?) [3.08/Standard Edition]
Re: Not working ProdDVB Versions - USB DVB-T Stick Terratec
Posted: Fri Jun 25, 2010 6:22 pm
by fulbrich
and this is
# ProgDVB Version 6.43.01 Standard Edition
NOT working with this Terratec T3 Stick.
Quality = 0 -> no channels
Re: Not working ProdDVB Versions - USB DVB-T Stick Terratec
Posted: Fri Jun 25, 2010 6:22 pm
by Prog
It is very old version of ProgDVB.
Re: Not working ProdDVB Versions - USB DVB-T Stick Terratec
Posted: Fri Jun 25, 2010 6:23 pm
by fulbrich
# ProgDVB Version 6.43.02 Standard Edition
Re: Not working ProdDVB Versions - USB DVB-T Stick Terratec
Posted: Fri Jun 25, 2010 6:26 pm
by fulbrich
Hmmm...
the older version of software works, the newer versions not.
I use the same Lapton, Stick ans Antenna at the same location.
Not good, isn't it ?
Re: Not working ProdDVB Versions - USB DVB-T Stick Terratec
Posted: Fri Jun 25, 2010 8:18 pm
by Prog
You can copy old bda.device to new ProgDVB. But I am not have good idea.
Re: Not working ProdDVB Versions - USB DVB-T Stick Terratec
Posted: Fri Jul 02, 2010 11:45 am
by fulbrich
Hi PROG,
I copied my BDA.device file from the old working (Version 4) installation to the following newer versions.
Unfortunetly without success. The following versions don't work with my stick.
# ProgDVB Version 5.16.02 Standard Edition
# ProgDVB Version 6.43.01 Standard Edition
-> Problem is that no channels are detected.
-> Channels are scanned
-> Level meter shows different levels
-> Quality meter shows always 0 (zero)
-> no channels detected
I give up.... I guess.
Best regards,
Frank
Re: Not working ProdDVB Versions - USB DVB-T Stick Terratec
Posted: Fri Jul 02, 2010 8:28 pm
by Prog
Do you have problem in origenal software?
Re: Not working ProdDVB Versions - USB DVB-T Stick Terratec
Posted: Mon Jul 05, 2010 7:11 am
by fulbrich
Hi Prog,
thanks a lot for your answer.
I tested this on 2 different Laptops.
# Windows XP professional SP3 englsh
# Windows 7 english
The stick and the Terratec Driver is working with the original Terratec Viewer Software which is included with the stick .
It works on both computers.
It is working with ProgDVB Version 4.92.3 (4 ?) [3.08/Standard Edition] (Setup Named as 4.92.4) on both Computers.
I uses as provider "Germany - All channels"
It works with Microsoft Windows Media Center (which is part of my Windos 7 operation system) on my Windows 7 computer.
Best rgards,
Frank