small issue with 6.49.06
Posted: Sun Nov 21, 2010 9:19 am
Look at the picture...
Olinma
Olinma
What DVB device?
ps: This value from driver without filter line in old version.
progdvb.com
small issue with 6.49.06
Page 1 of 1
Re: small issue with 6.49.06
Posted: Sun Nov 21, 2010 9:36 am
Re: small issue with 6.49.06
Posted: Sun Nov 21, 2010 3:46 pm
...Terratec-DVB-T - USB-Stick. Not a big problem though but this behavior is new (don't know exactly from which version on but within 6.49.xx).
Olnima
Olnima
Re: small issue with 6.49.06
Posted: Mon Nov 22, 2010 7:09 pm
Same problem here with Terratec Cinergy 1200 DVB-C tuner
Level will stay at 0.
Working OK with ProgDVB 6.49.03
ProgDVB 6.49.06 (XP SP3):
Level will stay at 0.
Working OK with ProgDVB 6.49.03
ProgDVB 6.49.06 (XP SP3):
Re: small issue with 6.49.06
Posted: Mon Nov 22, 2010 8:09 pm
Also tested with older PC and TechnoTrend budget 1501.
Level indicator is working but ProgDVB will crash when locking/finding channels.
Working OK with ProgDVB 6.49.03
ProgDVB 6.49.03 (XP SP1):
Level indicator is working but ProgDVB will crash when locking/finding channels.
Working OK with ProgDVB 6.49.03
ProgDVB 6.49.03 (XP SP1):
Re: small issue with 6.49.06
Posted: Tue Nov 23, 2010 7:42 am
Thanks for report. I am test again that for next version.
Re: small issue with 6.49.06
Posted: Sat Nov 27, 2010 1:42 pm
...in 6.49.07 the level-indicator shows always "0" without any green segment (it was always 100% in older versions... 
)
)Re: small issue with 6.49.06
Posted: Wed Dec 01, 2010 9:40 pm
Same problem here with ProgDVB 6.49.07.Doman wrote:Same problem here with Terratec Cinergy 1200 DVB-C tuner
Level will stay at 0.
Working OK with ProgDVB 6.49.03
Re: small issue with 6.49.06
Posted: Thu Dec 02, 2010 8:12 am
please try this module http://test.progdvb.com/BDA.7Z
Re: small issue with 6.49.06
Posted: Sat Dec 04, 2010 12:43 am
I am sorry for the delay in responding.Prog wrote:please try this module http://test.progdvb.com/BDA.7Z
I notice NO difference with new test BDA module.
I have tested too with Terratec Cinergy C PCI-HD and TechnoTrend CT-3650 USB devices.
Level reading seems also not working correctly.
ProgDVB 6.49.07, TechnoTrend CT-3650 USB
The level indicators of Terratec Cinergy C PCI-HD will never show 100% but 98%
This is a bug of Cinergy C PCI-HD driver!
Re: small issue with 6.49.06
Posted: Sat Dec 04, 2010 7:23 am
In last version I am take level from driver without changes in Engine. But is not bug of driver. Because what is "level" ? It is very virtual value.
Re: small issue with 6.49.06
Posted: Sun Dec 05, 2010 1:25 pm
Testing with ProgDVB 6.49.08:
Terratec Cinergy 1200 DVB-C tuner:
Level indicator is NOT working, always showing 0.
(Last version level working ok is 6.49.04)
Terratec Cinergy C PCI-HD:
Level indicator working OK.
TechnoTrend CT-3650 USB (DVB-C):
Level indicator working OK.
Also I noticed since ProgDVB 6.49.04 tuning/changing channels is slower then 6.49.03 and below.
Terratec Cinergy 1200 DVB-C tuner:
Level indicator is NOT working, always showing 0.
(Last version level working ok is 6.49.04)
Terratec Cinergy C PCI-HD:
Level indicator working OK.
TechnoTrend CT-3650 USB (DVB-C):
Level indicator working OK.
Also I noticed since ProgDVB 6.49.04 tuning/changing channels is slower then 6.49.03 and below.
Re: small issue with 6.49.06
Posted: Mon Dec 06, 2010 12:25 pm
Tested with Terratec-USB-DVB-T-Stick and 6.49.08:
After switching to another channel for about one second the bar shows "100%" with all green segments. After this second "0%" with no green segment...
Olnima
P.S.:
After switching to another channel for about one second the bar shows "100%" with all green segments. After this second "0%" with no green segment...
Olnima
P.S.:
Tried out the upper mentioned module - same behavior as described above, except that the level is always "0" without the green segments, also during the first second after switching a channel.Prog wrote:please try this module http://test.progdvb.com/BDA.7Z