progdvb.com

Posted: **Mon Feb 19, 2007 12:29 pm**

I have SkyStar HD and ProgDvb 5.00.4. When I want to find a Premiere HD on ASTRA 19 11914H DVB-S2, the Quality is about 70-80% but level is 0%. Second question why in ProgDvb can't find driver for SkyStar HD and I must to use some BDA driver. Please help me how to solved my problem.

Posted: **Mon Feb 19, 2007 12:46 pm**

I have SkyStar HD and ProgDvb 5.00.4. When I want to find a Premiere HD on ASTRA 19 11914H DVB-S2, the Quality is about 70-80% but level is 0%.

Sounds like the card is not 100% compatible with progdvb..

Second question why in ProgDvb can't find driver for SkyStar HD and I must to use some BDA driver.

Afaik the card comes with bda driver....and as every card that runs on bda driver...you have to choose a BDA device in device list (as i wrote xxx times before ...here in this forum)

Posted: **Mon Feb 19, 2007 1:27 pm**

I am not have any problems with DVB-S2 transponder in my home. But I am not have all transponders and not can test.

Try set all params in scan transponder, set dvb-s2 checkbox and push lock.

Posted: **Mon Feb 19, 2007 2:46 pm**

I try to set freqvency 11914H and DVB-S2 but again not work. When I tray to put transporter where is ASTRA HD everithing is OK but for 11914H - Premiere HD not work.

Posted: **Mon Feb 19, 2007 8:00 pm**

ASTRA HD DVB-s2 also? Different fec?

Posted: **Mon Feb 19, 2007 8:07 pm**

BDA or WDM?

Posted: **Mon Feb 19, 2007 10:45 pm**

I use BDA Driver for my SkyStar HD. All DVB-S2 channels not work, Quality is about 70-80% but level is 0%. Only Astra HD Promo work but this chanel is DVB-S. The fec for Premiere HD is 9/10 and frequency is 11914H 27500.

Posted: **Mon Feb 19, 2007 10:51 pm**

Now I use ProgDVB 5.00.6 but the problem is the same. Also not work well the switching from Astra to HotBird i have 2 LNB's with diseq switsc. Sometime I have signal to HotBird somtimes not.

Posted: **Tue Feb 20, 2007 8:12 am**

I am not have SkyStar HD, but it same card then 3200 with same driver? Can you install driver from technotrend?

Posted: **Tue Feb 20, 2007 8:17 am**

but it same card then 3200

Yes , it is ...

Posted: **Tue Feb 20, 2007 8:43 am**

Please can you tell me the address for drifer for technotrend 3200 I can't find it. Thank You!

Posted: **Tue Feb 20, 2007 8:49 am**

http://www.technotrend.com/english/down ... nload.html

Posted: **Wed Feb 21, 2007 7:42 am**

I install driver for technotrend 3200 and now switching from Astra to HotBird is OK. Also the Quality with original driver for my SkyStar HD was always 100% and now is real 90-98%. But the problem with DVB-S2 is not solved again Level is 0% ana Quality is vary from 0% to 100%.

Posted: **Sun Feb 25, 2007 1:45 pm**

I think the problem is because the FEC for Premiere HD is 9/10, how can I pick from manual transporder search FEC 9/10. Also the phase modulation for Premiere HD is 8PSK, how can I chouse this modulation.

Posted: **Sat Mar 03, 2007 11:14 am**

pronto123 wrote:I think the problem is because the FEC for Premiere HD is 9/10, how can I pick from manual transporder search FEC 9/10. Also the phase modulation for Premiere HD is 8PSK, how can I chouse this modulation.

That's not real: I'm afraid it's not reported correctly by anyone, but for sure the FEC is not 9/10, but it doesn't matter since the TT-3200 (and the Skystar HD) have AutoFEC. I guess the real problem is in the modulation...