Page 1 of 1
Diseq (LNB 2, LNB3, LNB4) Does not Work
Posted: Sat May 16, 2015 11:39 am
by Hamza Sadiq
Hi there
will appreciate if any one helps to solve the problem of no signal and no channel search on LNB 2,3,4 while the signal and channel search are OK on LNB 1 , Tested on a receiver all 4 LNB are Ok , where the problem
I am using AvereMedia BDA
Re: Diseq (LNB 2, LNB3, LNB4) Don Not Work
Posted: Sat May 16, 2015 12:07 pm
by Prog
Check Settings->Device options->Mode
Re: Diseq (LNB 2, LNB3, LNB4) Don Not Work
Posted: Sat May 16, 2015 1:00 pm
by Hamza Sadiq
thanks for your quick reply
On setting scroll down
I have TV source & Option , where i could see the (device option) and (Mode)
Re: Diseq (LNB 2, LNB3, LNB4) Does not Work
Posted: Mon May 18, 2015 2:45 am
by Hamza Sadiq
Any Help Please
Re: Diseq (LNB 2, LNB3, LNB4) Does not Work
Posted: Mon May 18, 2015 9:47 am
by Prog
Try select other mode. Microsoft for example.
Settings->name of device
Re: Diseq (LNB 2, LNB3, LNB4) Does not Work
Posted: Thu May 21, 2015 3:23 am
by Hamza Sadiq
Tried all modes but non of them works
Re: Diseq (LNB 2, LNB3, LNB4) Does not Work
Posted: Thu May 21, 2015 6:29 am
by Prog
x32? Do you have problem in other software?
Re: Diseq (LNB 2, LNB3, LNB4) Does not Work
Posted: Thu May 21, 2015 4:21 pm
by Hamza Sadiq
Win 7 64 i have no problem with other software
Re: Diseq (LNB 2, LNB3, LNB4) Does not Work
Posted: Thu May 21, 2015 6:30 pm
by Prog
Try x32 version of ProgDVB at first.
Re: Diseq (LNB 2, LNB3, LNB4) Does not Work
Posted: Sat May 23, 2015 2:04 pm
by Hamza Sadiq
Many thanks for your continuous support
I have again tried x32 version but with no success
where is the problem?
i have been using ProgDVB since 2002 and this is first time I have problem with this great and wonderful software
Hope the solution will come soon
Re: Diseq (LNB 2, LNB3, LNB4) Does not Work
Posted: Wed May 27, 2015 8:54 am
by Prog
I am not can really help you before 16.06. But you can try other modes.
Re: Diseq (LNB 2, LNB3, LNB4) Does not Work
Posted: Thu Jul 02, 2015 6:02 pm
by Hamza Sadiq
Any outcome , on this
Re: Diseq (LNB 2, LNB3, LNB4) Does not Work
Posted: Thu Sep 24, 2015 5:50 am
by Hamza Sadiq
Await your support on this please help
Re: Diseq (LNB 2, LNB3, LNB4) Does not Work
Posted: Thu Sep 24, 2015 6:27 am
by Prog
I am not have idea why not working. You must select in device options manufacture of DVB card.