SNR value in decibels.
Posted: Tue Sep 01, 2015 11:02 am
Hi my master,
"SNR value in decibels" Is possible to add ?
Example Picture ;
Regards.
"SNR value in decibels" Is possible to add ?
Example Picture ;
Regards.
progdvb.com
SNR value in decibels.
Page 1 of 1
Re: SNR value in decibels.
Posted: Sun Sep 13, 2015 10:56 am
any idea ?
Re: SNR value in decibels.
Posted: Sun Sep 13, 2015 11:39 am
It is very depended from device. Not all device give more one value...
Re: SNR value in decibels.
Posted: Sun Sep 13, 2015 4:20 pm
Just right.Prog wrote:It is very depended from device. Not all device give more one value...
However, "Crazyscan & IQ_monitor" and similar programs, "SNR value in decibels" it is possible to view it.
I thought, progdvb can be adapted to this feature.
Regards.
Re: SNR value in decibels.
Posted: Mon Sep 14, 2015 5:22 pm
While any frequency; "SNR dB value" can be imaged simultaneously.
,
Example; Prof 7301 HD TV card + EBSpro ;
As a result; is this feature can be adapted to ProgDVB ?
Regards.
,
Example; Prof 7301 HD TV card + EBSpro ;
As a result; is this feature can be adapted to ProgDVB ?
Regards.
Re: SNR value in decibels.
Posted: Tue Sep 15, 2015 5:15 am
Do some card yes. But it is really need for watch TV? I think ProgDVB already show too many indicators.
Re: SNR value in decibels.
Posted: Tue Sep 15, 2015 9:19 am
Yes master,Prog wrote:But it is really need for watch TV?
Realistic signal level, can be seen only with the db.
and to see it immediately in progdvb will provide convenience.
Best regards.
Re: SNR value in decibels.
Posted: Wed Sep 16, 2015 7:35 pm
Is it really needed to watch TV? Mostly it is needed while tuning dish or when there are problems with TV image. In this case you can use special software like signal analyser you screenshoted.
Re: SNR value in decibels.
Posted: Wed Sep 16, 2015 8:04 pm
Hey man,zhenya_hacker wrote:Is it really needed to watch TV? Mostly it is needed while tuning dish or when there are problems with TV image. In this case you can use special software like signal analyser you screenshoted.
Thank you for your interest in the subject.
The intention is quoted as written.
So, can see in real-time. ( concurrency )serkanguzel wrote:
Realistic signal level, can be seen only with the db.
Best regards.
Re: SNR value in decibels.
Posted: Wed Sep 16, 2015 8:06 pm
This feature; ProgFinder also be adapted too.
Re: SNR value in decibels.
Posted: Thu Sep 17, 2015 6:19 am
Not realistic. This this value from tuner. One device can show 20 other 30 on same cable.
Re: SNR value in decibels.
Posted: Thu Sep 17, 2015 12:11 pm
Dear master,Prog wrote:Not realistic. This this value from tuner. One device can show 20 other 30 on same cable.
I agree.
3 samples for different devices;
Sample frequence; Turksat 11096 H 30000
1) Sathero SH-300 ; 11.80 db
2) Dreambox 800se, M801A Alps tuner ; 12.20 db
3) Prof 7301 tv card, STV0903bab demod ; 12.00 db.
As can be seen, the values are too close together.
Therefore, the most realistic signal level is obtained by the still decibels.
If you are able to adapt to this feature, I'll be really happy.
ProgDVB or ProgFinder it does not matter.
Best regards.