Display posts from previous
Sort by

weird problem

#1 by redbull86
hello

i have tried to use progdvb in Windows Vista (32 bit), But i there is a weird problem. When i try to scan channels it doesn't find much channels.

- when i click the lock button it shows a good signal level (70-80-90%) and a signal quality of 100% so far everything is ok, But when i click the scan button it doesn't find any channel.

P.S. in Windows XP i can use the same hardware and same version of progdvb without any problem

Re: weird problem

#2 by Juergen
redbull86 wrote:...When i try to scan channels it doesn't find much channels.

...But when i click the scan button it doesn't find any channel...
Now what, not much or none at all?
Technically, this makes a really big difference...

Let people know about the DVB device and driver.
If it uses a BDA driver, you may have to check device options.

Inform people about LNB(s) and position(s), switches and alike.

And mention the ProgDVB version(s) tested, precisely.

Perhaps create a helpful signature.
People aren't supposed to re-read or remember all your previous postings, to get an idea.
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!


I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!

1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

#3 by ter9999
This really a big issue for ProgDVB on Vista32,
Channels on some TPs can't be searched out (signal can be locked).

The only workaround for this is to tune onto a good channel, then go to it's "channel properties", then manually update the frequency/SR to that TP, then click "Apply", then channels from that TP will be out in the channel list.


BIG ISSUE! BIG ISSUE! BIG ISSUE!!
Windows 7, 64-bit.
Twinhan AD-SP400(1041) DVB-S2.
KNC1 DVB-S2.
Technotrend S2300 Premium DVB-S.
Technotrend C1500 DVB-C.
Technotrend DVB-T TV-stick.
ATI 4550.
Asus Xonar HDAV1.3 Deluxe.
Creative S750 speaker system.
Latest ver.6 of ProgDVB Pro.

#4 by ter9999
I've send Prog sample for this issue, but no finding on his side....

Twinhan AD-SP400 w/ latest driver
lastest version 5 of ProgDVB
Windows Vista SP1 32-bit
Windows 7, 64-bit.
Twinhan AD-SP400(1041) DVB-S2.
KNC1 DVB-S2.
Technotrend S2300 Premium DVB-S.
Technotrend C1500 DVB-C.
Technotrend DVB-T TV-stick.
ATI 4550.
Asus Xonar HDAV1.3 Deluxe.
Creative S750 speaker system.
Latest ver.6 of ProgDVB Pro.

Re: weird problem

#5 by redbull86
redbull86 wrote:...When i try to scan channels it doesn't find much channels.


{i can scan only channels with a sr higher then 22500 ksps)
...But when i click the scan button it doesn't find any channel...
Now what, not much or none at all?
(this happens when i try to scan manually channels, it happens on channels which have a sr lower then 22500 ksps.)
Technically, this makes a really big difference...

Let people know about the DVB device and driver.
If it uses a BDA driver, you may have to check device options.
Windows Vista (32bit)
Pinnacle PCTV 450e DVB-S USB box
driver version 1.0.2.4 (BDA driver)
Inform people about LNB(s) and position(s), switches and alike.
no switch
sattelite at 42.0 West
And mention the ProgDVB version(s) tested, precisely.

latest version of progdvb 5.16 (also tried different versions of ProgDvb)
Perhaps create a helpful signature.
People aren't supposed to re-read or remember all your previous postings, to get an idea.

#6 by Juergen
On the German pages of pinnaclesys, the deivises don't have numbers.
So, could you perhaps point us to the correct page for technical specs?

What minimum symbol rate is specified for that device?
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!


I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!

1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

#7 by redbull86
On the German pages of pinnaclesys, the deivises don't have numbers.
So, could you perhaps point us to the correct page for technical specs?
this is the driver page
http://cdn.pinnaclesys.com/SupportFiles ... mePCTV.htm

a direct link to the driver
http://cdn.pinnaclesys.com/SupportFiles ... a32_64.zip

i coudn't find a page with technical information about the device.
What minimum symbol rate is specified for that device
where can i see that?

P.S. in windows xp i was able to watch all channels with a starting symbolrate of 2050 ksps up to 30000 ksps.

#8 by Juergen
As long, as you don't know how, please don't use BBCode here.

You did mix things up completely, and I just had to correct several misleading things, like wrong quotes on what I never said.

And don't try to change colours, if that's not important for the message's content.
___________________________________________________________

However,
P.S. in windows xp i was able to watch all channels with a starting symbolrate of 2050 ksps up to 30000 ksps.
You should have mentioned that in the beginning.
So the whole issue must be driver related, no more, no less.
Not ProgDVB related.
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!


I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!

1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>